Page 2
Act. This User Manual may contain printing errors and be Coalville LE67 3HB, United Kingdom TEL: +44-1530-569620 subject to change without notice. InBody will not be liable for Website: uk.inbody.com E-mail: uk@inbody.com any damage from the violation of this User Manual.
InBodyBAND3. For example, the pacemaker may malfunction due to the current flowing through the body during InBody Test and this could pose a serious risk to your health and safety. InBody Co., Ltd. will not be liable for any injury or damage from violating these warnings. • Bioelectrical Impedance Analysis (BIA) method uses micro-current and does no harm to the human body. However, if a pregnant woman uses InBodyBAND3, her fetus may be affected. Therefore,...
Page 6
It may cause temporary or permanent eye injury. • Do not disassemble or modify InBodyBAND3. It may cause product failure, measurement error, or personal injury. InBody will not be liable for any damage or loss caused by disassembling InBodyBAND3. • Use InBodyBAND3 under the operating environment specified in InBodyBAND3 specifications.
2 InBodyBAND3 Overview 2.1 Components InBodyBAND3 has the following components. First, check if all the parts are included. Quick Start Guide InBodyBAND3 Charger Quick Start Guide 2.2 Names of Components Spring bar Handle Charging Terminal Finger Display Electrode Electrode Heart rate Measurement Sensor Buckle...
3 Preparations 3.1 Charging the Battery • Any foreign matter (like sweat, liquid, dust, etc ) between the charging terminal Caution will block the InBodyBAND3 from charging. • If the power is not not stable during charge, the display may not work. In this case, detach the InBodyBAND3 from the charger.
> InBodyBAND3 > Low Battery Mode is turned on. 3.2 Installing and Connecting the InBody App You can use the InBody App to record and manage InBody results. Installing the InBody App Search InBody from Apple App store or Google Play store and install.
InBodyBAND3 screen with the InBody App. • When setup is complete, a time screen appears. • The InBodyBAND3 is available only when it is linked to the InBody App. Note • Please update to the latest firmware version after the initial connection. The firmware can be updated from the InBody App >...
To turn on the display of the InBodyBAND3, rotate your wrist inward. Note You can change the wrist-turning display option and the wrist option in icon > InBodyBAND3 > Screen Setting of the InBody App. Option 2 If you touch the screen, the display will turn on.
Preparations 3.5 Navigating InBodyBAND3 You can swipe up or down on the display to navigate. • You can change the type and sequence of the screen in Note icon > InBodyBAND3 > Screen Setting > Display Setting. • This product does not support the left-right scroll function 3.6 Running InBodyBAND3 Apps Tap the app to either run or view more options.
Align the end of the strap with the Tilt the end of the strap and push main body. in the tip to the main body. Push the latch inward and fasten the other end. Note Accessories such as straps and charger are available for purchase on shop.inbody.com.
/ Heart Rate / Battery Percentage Battery Percentage • Sync InBodyBAND3 with the InBody App to adjust it to your local time zone. If the Note InBodyBAND3 has not been synced with the InBody App for a long time, the time may be off.
Page 15
Using InBodyBAND3 Running an InBody Test Go to the InBody Test screen, and tap the center of the screen. Check and correct your current weight, then press Measure on the screen, and cover the electrodes with your thumb and index finger.
Page 16
Using InBodyBAND3 Posture for Accurate InBody Test Put your fingers on the electrodes to touch with as much skin contact as possible contact as possible. Lightly press on the electrodes with two fingers. Make sure the InBodyBAND3 is stable on your wrist.
Page 17
Using InBodyBAND3 Error message during InBody Test The following error messages may appear during the InBody Test when... When the wrist and measuring fingers are dry Wipe your fingers and wrist with a damp cloth or a moisture wipe, and test it again.
(bedtime ~ wake-up time). You can check your sleep patterns and sleep details in the InBody App. You can set your sleep sensitivity in the icon > InBodyBAND3 >Sleep sensitivity of the InBody App. Time Asleep of the Bedtime and wake-up time previous day...
• Since InBodyBAND3 is not a medical device, it is not intended to decide on Caution the symptoms of a disease. • You should enable Automated Heart Rate and Stress Measurement on the InBody Note App to measure the heart rate.
Page 20
Using InBodyBAND3 When real-time heart rate is not reading on the InBodyBAND3 "..." icon may show up if the InBodyBAND3 is unable to monitor your heart rate in real time due to how it's worn, vigorous movement, etc. In that case, stop moving and reposition your InBodyBAND3 properly. The same bpm screen will be available for the main screen, exercise monitoring, and EZTraining.
> InBodyBAND3 > Screen Setting. If your InBodyBAND3 has not been synced with your InBody App for awhile, the weather data may not be available on your InBodyBAND3. If your screen displays like below, please try reconnecting it with the InBody App.
• Timer : A timer can be set up to 99:30 minutes. Once the set time elapses, You will be alerted through the display and vibration. • Alarm : You can enable or disable the alarm on the InBody App. Up to 10 alarms can be displayed.
Walking Walking Moving Wearing Notification (40 %) Notification (100 %) Notification Notification Note You can set the start/end time and time interval for wearing the InBodyBAND3 on the InBody App > icon > InBodyBAND3 > Move...
4.13 EZTraining Go to InBody App > Dashboard > EZTraining, and select up to 12 exercises from the exercise choices provided such as Squats, Lunge, and Burpee. Then, the device will recognize those movements and record the progress.
3. I'm having trouble running the InBody Test • There may be difficulties in obtaining accurate results from the InBody Test if the electrodes do not properly contact the skin on the wrist or fingers, if movement or speaking occurs during the test, or if the hands come into contact with each other.
Page 26
• If the battery from the InBodyBAND3 is discharged, it is not possible to track the sleep data. Charge the InBodyBAND3 before bedtime. • The InBodyBAND3 shows only the information with the longest time asleep of the day. (For more information about sleep, please check the InBody App.) • In the InBodyBAND3, the today's sleep information displays sleep information from last night.
Page 27
• Check whether Bluetooth is connected between the InBodyBAND3 and the mobile device. • Please check if the InBody App notification access is set to "Allow". You can set the notifications you want to receive from the InBody App >...
Page 28
17. How can I apply the InBodyBAND3 warranty? • The InBodyBAND3 warranty period is one year from the purchase date. Negligence and/or physical damage is not covered under warranty. For assistance or warranty questions please contact the Product Support team at Support@inbody.com.
• Arbitrary disassembly of InBodyBAND3 • Unauthorized modification of product controls • Repair by a person other than the repair representative designated by InBody • Failure caused by the consumer’s fault: ‒ Product failure and damage caused by the user’s negligence (fall, moisture intrusion, shock, damage, forcible control, etc.)
Need help?
Do you have a question about the BAND3 and is the answer not in the manual?
Questions and answers