Advertisement
Quick Links
ARGO INSTALLATION INSTRUCTIONS
Review this manual in its entirety prior to proceeding with installation. Please note that we retain the right to
modify product specifications as needed to accommodate potential technical enhancements.
IR switch
Hanger
LED strip
Power cord
Electrical box
Advertisement
Related Manuals for Oxygen VANITA ARGO
Summary of Contents for Oxygen VANITA ARGO
- Page 1 ARGO INSTALLATION INSTRUCTIONS Review this manual in its entirety prior to proceeding with installation. Please note that we retain the right to modify product specifications as needed to accommodate potential technical enhancements. IR switch Hanger LED strip Power cord Electrical box...
- Page 2 ARGO INSTALLATION INSTRUCTIONS Warnings and precautions for use regarding the electrical connections. Our products are intended exclusively for indoor use. The electrical connection and any subsequent electrical adjustments must be carried out solely by a qualified electrician, who will adhere to all applicable electrical regulations and instructions. In the event that the external flexible cable or cord of this appliance becomes damaged, it must be replaced solely by the manufacturer or their authorized agent to prevent any potential hazards.
-
Page 3: Tools Required
ARGO INSTALLATION INSTRUCTIONS TOOLS REQUIRED 1. Gather a pencil, level, measuring tape, stud finder, and painter’s tape. Retrieve the fixing bar from the packaging. Contains: 1 x Mirror, screws, wall plugs 2. With a level, positon the fixing bar so that it is perfectly level. Calculate "X" from the hole of the fixing bar to the top of the mirror. -
Page 4: Wiring Diagram
ARGO INSTALLATION INSTRUCTIONS 4. Drill and insert the screw anchors suited to the type of wall to which the mirror will be fixed to. If mounting on drywall, use the provided screws according to the diagram. For wood studs, use only the provided screws. 5. - Page 5 ARGO INSTALLATION INSTRUCTIONS NOTES: Avoid touching the sensor directly. ● ● Position your hand approximately 4” - 6” away from the sensor. ● When waving, avoid excessive speed. ● Once you've adjusted your mirror to the desired color temperature and brightness level, simply power off the mirror, and all settings will be saved automatically.
Need help?
Do you have a question about the VANITA ARGO and is the answer not in the manual?
Questions and answers