1. Manuals
  2. Brands
  3. Predator Manuals
  4. Enclosure
  5. PO7-660
  6. User manual

Predator PO7-660 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Table of Contents -
1
PREDATOR PO7-660
USER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PO7-660 and is the answer not in the manual?

Questions and answers

Summary of Contents for Predator PO7-660

  • Page 1 Table of Contents - PREDATOR PO7-660 USER’S MANUAL...
  • Page 2 © 2024. All Rights Reserved. Desktop Computer Covers: Tower models This revision: DEC. 2024 V1.02 Important This manual contains proprietary information that is protected by copyright laws. The information contained in this manual is subject to change without notice. Images provided herein are for reference only and may contain information or features that do not apply to your computer.

  • Page 3: Table Of Contents

    Table of Contents - Table of Contents Remove a memory module ..16 1. UPGRADING YOUR COMPUTER ..5 Install a memory module ... 17 Installation precautions ....5 Graphics board ........18 ESD precautions ......... 5 Remove the Graphics board ..18 Required tools ........

  • Page 4: Upgrading Your Computer

    - Upgrading your Computer Upgrading your Computer In this section, you will find: • Instructions on how to replace a hardware component...

  • Page 5: Installation Precautions

    Upgrading your Computer - 5 1. UPGRADING YOUR COMPUTER Installation precautions Before you install any computer component, we recommend that you read the following sections. These sections contain important ESD precautions along with pre-installation and post-installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components.

  • Page 6: Pre-Installation Instructions

    - Upgrading your Computer Pre-installation instructions Always observe following before install component: Make sure that the ODD and card reader slot is empty. Turn off the power to the computer and all peripherals. Unplug the power cord from the computer. Unplug the network cable and all connected peripheral devices from the computer.

  • Page 7: System Upgrade

    Upgrading your Computer - 7 System Upgrade Remove the Left side system cover Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the Pre- installation instructions on page 6. Remove the two screws that secure the system cover to the computer.

  • Page 8: Install The Left Side System Cover

    - Upgrading your Computer Install the Left side system cover Align the cover hook to the sides of the computer and slide the cover toward the front of the computer. Secure the cover with two screws. Observe the Post-installation instructions on page 6.

  • Page 9: Remove The Right Side System Cover

    Upgrading your Computer - 9 Remove the Right side system cover Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the Pre- installation instructions on page 6. Remove the two screws that secure the system cover to the computer.

  • Page 10: Install The Right Side System Cover

    - Upgrading your Computer Install the Right side system cover Align the cover to the sides of the computer and slide the cover toward the front of the computer. Secure the cover with two screws. Observe the Post-installation instructions on page 6...

  • Page 11: System Layout

    Upgrading your Computer - 11 System Layout M2_2 M2_4 Wifi M2_1 M2_3 3.5”HDD FIO Module M.2 SSD 2.5”HDD 3.5”HDD...

  • Page 12: Hard Drives

    - Upgrading your Computer Hard drives The computer supports installation of two 3.5-inch SATA Hard drives in the internal HDD cage. Remove the 3.5-inch Hard drives Perform Pre-installation instructions on page 6. Pull black rack out from HDD cage and take it off. Remove the Hard drives from the rack.

  • Page 13: Install The 3.5-Inch Hard Drives

    Upgrading your Computer - 13 Install the 3.5-inch Hard drives Remove the new Hard drive from their packaging. Insert the new Hard drive into the black rack. Insert black rack into HDD cage. Observe the Post-installation instructions on page 6...

  • Page 14: Memory

    - Upgrading your Computer Memory The computer has four DDR5 U-DIMM slots that support up to 128GB maximum system memory. Memory configuration guidelines To ensure data integrity, use only Acer-approved • DDR5 memory modules. Memory modules must be installed starting with •...
  • Page 15 Upgrading your Computer - 15 Size DIMM1 DIMM2 DIMM3 DIMM4 16GB 16GB 32GB 16GB 16GB 32GB 32GB 48GB 16GB 16GB 16GB 64GB 16GB 16GB 16GB 16GB 64GB 32GB 32GB 96GB 32GB 32GB 32GB 128GB 32GB 32GB 32GB 32GB Note 1. Inserting more than 3 DDR will slow down the speed to 4400MHz or higher.

  • Page 16: Remove A Memory Module

    - Upgrading your Computer Remove a memory module Perform Pre-installation instructions on page 6. Press outward the holding clips on both sides of the DIMM slot outward to release the memory module Gently pull the memory module upward to remove it from the DIMM slot Repeat steps 2~3 to remove the other memory modules.

  • Page 17: Install A Memory Module

    Upgrading your Computer - 17 Install a memory module Note DIMM slots on the mainboard must be installed only in certain configurations. Numbers next to DIMM slots correspond to installation sequence. Be sure to install the memory module in DIMM2 slot followed by DIMM4 slot.

  • Page 18: Graphics Board

    - Upgrading your Computer Graphics board The computer contains one Graphics board installed in the PCIe x16 slots. Remove the Graphics board Perform Pre-installation instructions on page 6. Remove five screws for VGA BRKT & PCIE cable disconnect the power cables from the Graphics board and put it on the side.
  • Page 19 Upgrading your Computer - 19 Remove five screws and release the baffle. Detach the Graphics board from the PCIe x16 slot Remove the screws that secure the Graphics board to the VGA Holder Bracket. RTX4080 RTX4090 RTX4070Ti VGA holder VGA holder...

  • Page 20: Install The Graphics Board

    - Upgrading your Computer Install the Graphics board Remove the new graphics board from its packaging. Fix Graphics board on VGA Holder Bracket with screws RTX4080 RTX4090 RTX4070Ti VGA holder VGA holder Insert the Graphics board into the PCIe x16 slot BRKT and fix VGA Holder Bracket on Graphics BRKT with two screws.
  • Page 21 Upgrading your Computer - 21 Secure the Graphics BRKT with screws and push the baffle down. Secure the Graphics with screws and Insert the Graphics cable into the PCIe x16 slot. RTX4070Ti / RTX4080 graphics board RTX4090 graphics board...
  • Page 22 - Upgrading your Computer Connect the power cables to the Graphics board. The PSU’s 12VHPWR cable connector lifetime 30 cycles. Observe the Post-installation instructions on page 6...

  • Page 23: M.2 Ssd Module

    Upgrading your Computer - 23 M.2 SSD module The computer contains M.2 SSD module(s) installed in the M.2 PCIe slot. Remove the M.2 SSD module Perform Pre-installation instructions on page 6. Remove Graphics board. Removing Graphics board. Remove the screw that secures the M.2 SSD module from the mainboard.

  • Page 24: Install The M.2 Ssd Module

    - Upgrading your Computer Install the M.2 SSD module Remove the new M.2 SSD module from its packaging. Position M.2 SSD thermal pad on MB. Insert the M.2 SSD module into its slot on the mainboard. Note...
  • Page 25 Upgrading your Computer - 25 Secure the M.2 SSD and thermal module with screws. Replace the Graphics board. See Installing the Graphics board. Observe the Post-installation instructions on page 6.

  • Page 26: Dust Filter

    - Upgrading your Computer Dust filter Remove the Dust filter Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the Pre- installation instructions on page 6. Push Handle from Dust filter and take it off...

  • Page 27: Remove The Front Bezel

    Upgrading your Computer - 27 Remove the Front Bezel Remove the screws from the Front Bezel bottom and take it off. Plastic pry...

  • Page 28: Remove The Top Cover

    - Upgrading your Computer Remove the Top Cover Remove the screws from the TOP Cover and take it off.

  • Page 29: Install M.2 Ssd To The Hot Swap Storage

    Upgrading your Computer - 29 Install M.2 SSD to the Hot Swap storage. Pull out portable SSD from Hot Swap slot. Release two screws from the Hot Swap storage.
  • Page 30 - Upgrading your Computer Open the Hot Swap storage. Insert the M.2 SSD module in the Hot Swap storage case.
  • Page 31 Upgrading your Computer - 31 Position M.2 SSD thermal pad and Metal plate. Close the Hot Swap storage case, and fix two screws.
  • Page 32 - Upgrading your Computer Install the M.2 SSD module...
  • Page 33 PredatorSense - 33 PredatorSense In this section, you will find: • Introduction to the PredatorSense utility • How to use PredatorSense...

  • Page 34: Predatorsense

    - PredatorSense 2. PREDATORSENSE PredatorSense (DT) is an Acer proprietary utility to enhance the user experience of Gaming products on Microsoft Windows 11. The central idea of this utility is to provide a user interface to easily control fan speed, LED chassis and also display system information.
  • Page 35 PredatorSense - 35 Category Description Provide overview of system information  GPU frequency Home  GPU/CPU Usage  GPU/CPU/System temperature information Provide control and adjustment for the Mode, Fan Control, Pulsar Lighting and Advanced Settings  Mode: Quiet, Balanced, Performance, Turbo mode for select ...

  • Page 36: If Vga Card W/Led Setting

    - PredatorSense If VGA card w/LED Setting  Refer to the below screen to control the LED of Fan and VGA card (if support) to change color or other function.

  • Page 37: If Memory W/Led Settings

    PredatorSense - 37 If Memory w/LED Settings  Follow the below step to control the LED of memory to change color or other function.

Table of Contents