Sleep Timer - Durabrand DCC0903D Owner's Manual

SLEEP TIMER

The Sleep Timer function enables you to shut off the power
without pressing POWER after a desired time period.
1
Set "SLEEP TIMER"
Press SLEEP on the remote control.
You may change the sleep time
with pressing SLEEP on the remote
control repeatedly. The timer is set
up to 120 minutes, 30 minutes each
time SLEEP is pressed.
To cancel the sleep timer:
Press SLEEP repeatedly until "SLEEP 0 MINUTE"
is displayed.
NOTES:
•
When you disconnect the unit from the AC outlet,
or if you have a power failure, the sleep time will
be lost.
•
To view the time left for sleep timer press SLEEP
once when SLEEP display disappears. After 10
seconds, display will disappear again.
TV
SLEEP 120 MINUTE
– 17 – – 17 –
EN
0C28