Advertisement
Advertisement
Table of Contents
Summary of Contents for FULLY WIRED ELECTRONICS Simple Triple Mixer
- Page 1 Fully Wired Electronics - Simple Triple Mixer User Manual...
-
Page 2: Table Of Contents
Fully Wired Electronics - Simple Triple Mixer User Manual v1.0 Contents: Limited Warranty………………….................2 Installation and Safety………..................3 Foreword…........................4 Module Overview…………………………………………………….........5 Technical Specifications....................7... -
Page 3: Limited Warranty
Fully Wired Electronics deems to be at the fault of the user are not covered by this limited warranty. Normal service rates will be applied. -
Page 4: Installation And Safety
Fully Wired Electronics - Simple Triple Mixer User Manual v1.0 Installation and Safety: Prior to installing and uninstalling this product, please ensure that your Eurorack power supply is turned OFF. Installing or uninstalling this product without doing so is potentially dangerous, running the risk of causing damage to your equipment and electrocuting yourself. -
Page 5: Foreword
User Manual v1.0 Foreword: Thank you for purchasing the Fully Wired Electronics - Simple Triple Mixer. We value all of our customers for their support. Your purchase is greatly appreciated! Special thanks to everyone who was involved during the development and... -
Page 6: Module Overview
User Manual v1.0 Module Overview: The Simple Triple Mixer (STM) is a 4HP 3 channel DC coupled active mixer, with a mono signal which is fantastic for mixing audio or CV signals together. This simple but useful module is perfect for any patch. - Page 7 Fully Wired Electronics - Simple Triple Mixer User Manual v1.0 6. IN 3 - The “IN 3” jack socket is used to input the signal routed through channel 7. OUT - The jack socket labelled “OUT” is used to output the resultant...
-
Page 8: Technical Specifications
Fully Wired Electronics - Simple Triple Mixer User Manual v1.0 Technical Specifications: ● Module Format: 3U ● Module Width: 4HP ● Module Depth: 32mm ● Power: ● +12v current draw: ● -12v current draw: 5mA ● +5v current draw: 0mA...
Need help?
Do you have a question about the Simple Triple Mixer and is the answer not in the manual?
Questions and answers