Garden Trading Clockhouse Butlers Coffee Table Assembly Instructions

Parts & Hardware
A
B
gardentrading.co.uk
customerservices@gardentrading.co.uk
TGTC, Hargreaves Road, Groundwell Industrial Estate, Swindon, SN25 5AZ
x 1
x 1
Clockhouse Butlers Coffee Table – Square
Assembly Instructions
WHEN ASSEMBLING THIS PRODUCT PLEASE PLACE PARTS
ON A SOFT SURFACE TO AVOID DAMAGE OR SCRATCHES.
Unlike traditional coffee tables, the practical and portable Clockhouse has a removable tray table top
and foldable legs, allowing it to be moved or stored away with ease, creating more floor space when
required. Whenever reattaching the tray to the table's strut legs, ensure it is properly secured before
use. See the images below. To maintain your coffee table, please wipe clean with a damp cloth.
Your new Clockhouse Butlers Coffee Table is supplied in two separate pieces.
1. First take the tray top section and gently place it upside down on the floor, with a blanket
or rug underneath it to prevent scratching. Once it's positioned upside down, four Velcro
strips located in each corner of the tray top's frame should be visible and facing upwards.
2. Next, take the accompanying strut legs and – without unfolding - turn them upside down,
so that corresponding Velcro strips found on these are now facing the floor. Holding your
upturned legs gently just above the coffee table tray, slowly start to ease them open.
Gradually unfold the legs until their Velcro strips connect and stick to all four corners of the
tray top. Once in place, check each leg and corner in turn to ensure that the Velcro pads are
firmly interlocked and completely aligned.
3. When your coffee tray top and legs are fastened, it is recommended that two people
manoeuvre your furniture as one piece, turning the coffee table over so it's now in an
upright, usable position. In doing so, ensure that both the legs and table top are held
carefully; despite creating a strong bond, Velcro alone won't withstand the coffee table's
weight without additional support.