Rago FABRICATION AC6702001NA Installation Manual

SHOCK GUARDS MODULAR STORAGE PANEL SYSTEM
2010-2022/TOYOTA 4RUNNER 2024/TOYOTA TACOMA
R1017T4RUMSP-DM AC6702001NA
WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION WARNINGS/CAUTIONS BEFORE STARTING INSTALLATION
-BEFORE YOU INSTALL THIS KIT-
-BEFORE YOU INSTALL THIS KIT-
Read and understand all instructions, warnings, Read and understand all instructions, warnings,
cautions, & notes contained in this installation
cautions, & notes contained in this installation
instruction guide. Consult your vehicle owner's instruction guide. Consult your vehicle owner's manual
for proper disconnection of electrical and lifting of manual for proper disconnection of electrical and
vehicle if required for installation of this product. lifting of vehicle if required for installation of this
product.
This install may require some technical skills and
This install may require some technical skills and knowledge of basic mechanical work. If you do not feel
knowledge of basic mechanical work. If you do not
that you are capable of performing this install please
feel that you are capable of performing this install take this product to a trained professional.
please take this product to a trained professional.
After reading this guide please contact us with any
questions or concerns before installing product. After reading this guide please contact us with any
questions or concerns before installing product.
Customer Service: 830-896-7571
INSTALLATION GUIDE INSTALLATION GUIDE
Rago Fabrication is not responsible for any bodily
Customer Service: 830-896-7571
injury or harm to you or your vehicle as a result of an
Rago Fabrication is not responsible for any bodily
improper install.
injury or harm to you or your vehicle as a result of an
improper install.
Proper installation of this kit required knowledge of
the factory recommended procedures for removal and
Proper installation of this kit required knowledge of
installation of original equipment components.
the factory recommended procedures for removal
and installation of original equipment components.
We recommend that the factory shop manual and
any special tools needed to service your vehicle be
We recommend that the factory shop manual and
on hand during the installation. Installation of this kit
any special tools needed to service your vehicle
without proper knowledge of the factory recommended
be on hand during the installation. Installation
procedures may affect the performance of these
of this kit without proper knowledge of the
components and the safety of the vehicle.
factory recommended procedures may affect the
TOOLS REQUIRED
- 13mm, 15mm, 18mm & 21mm sockets
- 10mm, 15mm, 18mm & 21 mm wrenches
- Pushpin Puller or Flathead Screwdriver
- #4 Allen Head
- Snips/Scissors
TOOLS REQUIRED
- 17mm Deep Socket
SKILL
SKILL
TIME REQUIRED
TIME REQUIRED
- Approximately 1 Hour
- Approximately 10 Minutes
Inspect all contents of this package to make sure
performance of these components and the safety of
product is not damaged and all installation hardware
the vehicle.
has been included. If parts are missing from kit, please
Inspect all contents of this package to make
be prepared to provide the following information: sure product is not damaged and all installation
hardware has been included. If parts are missing
1. Name of purchase location
from kit, please be prepared to provide the following
information: 2. Bar Code on side of box
3. Date above bar code
1. Name of purchase location
4. Date inside box cover
2. Bar Code on side of box
3. Date above bar code
4. Date inside box cover
*ALWAYS WEAR EYE PROTECTION
WHEN OPERATING POWER TOOLS*
*ALWAYS WEAR EYE PROTECTION
WHEN OPERATING POWER TOOLS*
- T40 Torx Bit
- Zip Ties
- 3/4 Wrench
LEVEL
LEVEL
- Easy
- 2 people
- Easy