GEOSATpro DVR1000ci Manual

GEOSATpro DVR1000ci
Add Transponders / Scan Channels
Do you want to add a new Free to Air channel, but cannot find the
correct Transponder in the TP list? It is easy to add a new TP to your
GEOSATpro DVR1000ci and scan for new channels.
Press the Menu Key on the remote control.
The Signal Quality Meter on the left of the screen should indicate
30% or better reading. If not, adjust the dish or LNBF placement to
peak for better quality before scanning for new channels.
www.glorystar.tv
Select
Input Password
Select
Example:
Select Satellite Name
If the TP Frequency is not in the list:
•
•
•
Select Scan
Installation
0,0,0,0
TP Edit / Scan
Enter TP Frequency
Select Polarization
Enter Symbol Rate
Free Only
Enter
, Press
Enter
, Press
IA-5Ku
11740
Vertical
22,000 MSPS
Toll Free 866-597-0728
key