BW-1602 IMPORTANT SAFETY CAUTIONS ......1 CLEANING AND MAINTENANCE ......8 INTRODUCTION ............. 2 Emptying the dust container ......8 Vacuum cleaner features ......... 2 Re-fitting the dust container ......8 Taking care of your cleaner ......2 Filters ..............9 UNPACKING ............
BW-1602 IMPORTANT SAFETY CAUTIONS • Do not immerse the appliance in water or Please read these instructions carefully before any other liquid. using the appliance for the first time. • Never leave the vacuum cleaner unattended WARNING- to reduce the risk of fire, electric when plugged in.
The carton should contain - unless they have been given supervision or 1 x BW-1602 vacuum cleaner. instruction concerning use of the appliance by a person responsible for their safety. 1 x Hose.
BW-1602 CLEANING OPTIONS Nozzle/brush tool Floor cleaning The nozzle/brush tool includes a rotating end The floor-cleaner attachment should be fitted that will switch between a plain nozzle or a with the extension tubes for regular cleaning small brush. of flooring. The attachment includes a brush for wood or tiled flooring that can be retracted •...
BW-1602 ASSEMBLING THE CLEANER Switch off the cleaner when fitting/removing Removing the hose the hose, extension tubes or attachments. Fitting the hose NOTE: It is always necessary to fit the hose when using the cleaner. 1. Hold down the catch on the hose coupler.
BW-1602 OPERATION Using the cleaner Preparation for use • Close the suction control on the handle. • Check that the power cable is disconnected. Set for full suction. • Empty the dust container if necessary. • Press the On/Off switch.
BW-1602 OPERATION Storage Cautions when cleaning Always store the cleaner and all attachments • Take extra care when using the cleaner on in a dry, cool place out of reach of children and stairs. pets. • Never operate the cleaner with the filters The slot on the back of the cleaner can be used removed.
BW-1602 CLEANING AND MAINTENANCE • Hold the dust container over a bin or bag. Always disconnect the cleaner from mains power before any cleaning operation. • Gently pull the tab at the bottom of the dust container to unlock the base.
BW-1602 CLEANING AND MAINTENANCE Removing the main filter Filters The main filter is inside the top of the dust IMPORTANT: There are three filters in the container. cleaner that require regular cleaning. If filter cleaning is neglected, suction performance • Remove and empty the dust container as will drop and the cleaner will be damaged.
BW-1602 CLEANING AND MAINTENANCE Removing the filter grille Cleaning the main filter The filter grille is inside the body of the dust • The main filter consists of two parts - the container. filter frame including a fabric filter and a foam filter.
BW-1602 CLEANING AND MAINTENANCE Checking the air outlet filter Re-assembling the filter grille The air outlet filter is a foam filter, located in When all components have completely dried, fit a holder at the back of the main body of the the top back into the container.
BW-1602 TROUBLESHOOTING SPECIFICATIONS Power supply ......230 - 240V~, 50Hz No power Check that mains power is connected and the Power consumption........1200 W cleaner is switched on. Class II double insulated. Reduced suction Switch off the cleaner. Check if the dust...
BW-1602 WARRANTY 4. Our liability under this manufacturer’s 1. Our goods come with guarantees that warranty is subject to us being satisfied cannot be excluded under the Australian that a defect was caused by defective Consumer Law. You are entitled to a...
Page 16
Made for Big W 1 Woolworths Way Bella Vista NSW 2153 Australia Made in China CONTEMPO BW-1602 V0.2...
Need help?
Do you have a question about the BW-1602 and is the answer not in the manual?
Questions and answers