Table of Contents
Advertisement
Quick Links
Model No. EB11
Original Instructions
User's Manual of Invanti Electric Bicycle
Tide 2
This QR code is a video tutorial for product installation. lt is recommended
to scan this QR code to leam more about how to use the product.
The illustrations and function descriptions in this user manual are for illustration purposes and reference only, and the products
are subject to the real product. The mentioned technical performance indicators are based on the specific experimental
environment, and the actual indicators may vary depending on the setting and environment. Do not use this product for any
illegal purpose. Some services are provided and supported by third parties, which may change at any time. Invanti does not
provide any guarantee for third-party services. Please read the terms of the third-party service and privacy policy carefully
before use.
The text and logo of INVANTI are trademarks or registered trademarks of enterprises affiliated with Invanti.
Other company, product or service names mentioned may be trademarks or registered trademarks of their respective owners.
The picture is for reference only.
© 2024 Invanti (Beijing) Technology Co., Ltd all rights reserved.
Before using the product, please read this manual.
V1.3
IMPORTANT! Read carefully and keep for future reference.
Advertisement
Table of Contents
Related Manuals for INVANTI Tide 2
Summary of Contents for INVANTI Tide 2
- Page 1 Do not use this product for any illegal purpose. Some services are provided and supported by third parties, which may change at any time. Invanti does not provide any guarantee for third-party services.
-
Page 2: Table Of Contents
Contents 1.Products & Accessories 2.Precautions for Use 3.Operation & Use 4.About charging 5.Display Operation 6. Check before Use 7.Technical Parameters 8.Maintenance & Repair 9.Authentication 10.Contact us * Please read and know the instructions described in the user manual carefully before using the electric bicycle and keep it for future reference. -
Page 3: Products & Accessories
Welcome 1. Products & Accessories Thanks for choosing the INVANTI Electric Bicycle, and experiencing the pleasure brought to you by travel and fitness. Shall ride legally in accordance with the local laws and regulations in case of any special local laws and regulations. -
Page 4: Precautions For Use
2. Precautions for Use 3. Operation & Use NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult a certified, reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike. - Page 5 Step 4 : Install the pedals. Step3: Install the handlebar Both ends of the left and right pedals are marked. First, install the right pedal by tightening the pedal clockwise. Tighten the left pedal by turning the pedal counterclockwise. Both pedals should be tightened with a torque wrench.
- Page 6 Step 6 : Install the rear mudguard bracket screws Step 8 : Replacement or installation of battery Firstly make sure the battery is switched off. Open the seat folding clips and lift the seat forwards. Using the key to open the battery lock, then remove or insert the battery along the slide. ①...
- Page 7 Step 9 : Start the e-bike Step 11 : Seatpost Replacement Press “ ” to switch on the battery, then press and hold the “ ” button on the display to start the E-bike. The display will start to work and the working power supply of the controller will be turned on. •...
-
Page 8: About Charging
4.About charging Protection To extend the battery life and intelligent use of li-ion battery, here are the regulations for care: Requirements on charging and discharging Please Only use the provided charger. A. Connect the power to the charger. B. Insert the charger's out-put connector to the battery's input connector. C. -
Page 9: Display Operation
Button Definition 5. Display Operation Buttons Long press Short press Press in setting mode Control buttons Light turn on/off Gear up Add value Switch display: Power on/off Switch parameters ODO/TRIP/VOL/TIME Button “+” Push mode on/off Gear down Decrease value (By speed 0 ) Power button Switch display: AVG/MAX/SPEED... - Page 10 Error code indicator Headlight on/off When a fault occurs in the electronic control system of your e-bike, the display will automatically indicate the By pressing and holding the button “ ” , the controller will turn on the headlights ; by pressing and holding the error code.
-
Page 11: Check Before Use
6. Check before Use Adjusting the height of the seat Unlock the lever (OPEN), adjust the seat height to the desired position without ever exceeding the mark carved onto the seat's tube, lock the lever (LOCK). The seat's height must be set So that your leg is stretched out when the Final Check Before Each Ride: corresponding pedal is in the lower position. -
Page 12: Technical Parameters
7. Technical Parameters 8. Maintenance & Repair Regularly check the complete E-bike Product name Electric Bicycle • Check whether the fasteners are locked and whether the joints of various parts are normal; Model EB11 • Check whether the pattern of the outer tire is worn or cracked, whether the front and rear tire pressure is Main technical parameters appropriate (Suggested tire pressure: 35~45 psi) , and whether the drive system is smooth;... -
Page 13: Authentication
WEEE needs to properly dispose of and recycle the product. This sign indicates that the product should not be Please note that Invanti has developed products with many functions and different models of products, and some of disposed of together with other domestic waste throughout the EU. -
Page 14: Contact Us
10.Contact Us If you encounter any problems when using the product, please contact us through the following methods. Amazon Platform: Contact Seller Email Address: aftersales@invanti.com Use Camera or QR Scanner to Scan... - Page 15 Model No. EB11 EB11说明书 Original Instructions 服务品牌 骑马订 书型 140×140mm 尺寸 1： 1 User's Manual of Invanti Electric Bicycle 比例 2023年10月 时间 Tide 2 单色 C:0 M： 0 Y:0 K： 85 颜色 技术要求： 1、 材质： 封面封底内页105g铜版纸。 2、 印刷图文颜色： 单色印刷， 不得见坑纹/黑点/褶皱/杂物， 外观整洁，...
Need help?
Do you have a question about the Tide 2 and is the answer not in the manual?
Questions and answers