Congratulations on your purchase of your new Kingsley ErgoPower Utility Cart. This ErgoPower Utility Cart system uses our standard 36” series utility cart with an electronic power system that is quiet with a long-life battery and built-in charging station. With just a twist of a throttle the cart effortlessly transports heavy loads over all types of surfaces, up ramps, and around tight corners.
FEATURE GUIDE: The ErgoPower Transport Utility Cart contains three major components: 36” series aluminum flat utility cart, control panel and drive train. Utility Cart: 36” series aluminum flat utility cart Control Panel: located along the Back of the utility cart.
(9) Come to a complete stop before changing DIRECTION SWITCH. (10) Come to a complete stop before changing SPEED SWITCH. (11) Always be aware of what is going on around you while operating the ErgoPower Cart and Drive Safely. CONTROLS AND DISPLAY...
Page 6
The throttle gives the operator complete speed control of the ErgoPower Utility Cart. The operator can control the speed of the cart by twisting the throttle slightly downward providing a little power to the drive train and then can increase the speed by small increments all the way to max speed all by the twist of the throttle.
The ErgoPower Utility Cart is ready to handle your day to day material transportation needs. Please note that maximum efficiency can only be achieved with sufficient battery power.
Please refer to the below picture. For more information regarding the Optional battery charger or to purchase, please contact Kingsley Company. *Note: the unit is not be operated when the charger is plugged in. - 8 -...
OPERATION INSTRUCTION Starting the unit: Step 1: Visually inspect the unit all around to make sure the unit is under the correct operating conditions. Before operating the cart check for any obstructions in the carts path and remove them if needed. (Do not forget to unplug the charger if it is still plugged into the unit.) Step 2: Turn the key switch to ON ( | ) position.
DISASSEMBLY WARNING! Disassembling the unit without The Kingsley Company prior consent will void the Warranty. The ErgoPower Utility Cart should not be disassembled without prior instructions from Kingsley. Please contact Kingsley if you are experiencing and difficulties with your ErgoPower Utility Cart. Please call 909-445- 1240 for details or e-mail at info@kingsley.com.
Need help?
Do you have a question about the ErgoPower and is the answer not in the manual?
Questions and answers