Advertisement
Quick Links
Operating instructions
Underframe for Washing Machine
64740
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WilTec 64740
Summary of Contents for WilTec 64740
- Page 1 Operating instructions Underframe for Washing Machine 64740 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 • Ensure that the machine is standing securely on the stand. Bear in mind that large vibrations can occur when the machine is in operation. Main components © by WilTec Wildanger Technik GmbH Item 64740 Page 3 http://www.wiltec.de 11 2024-1...
- Page 4 Assembly instructions • Make sure that the angled edges of part D are pointing upwards. • You will need 16 bolts with nuts (L) for this assembly step. © by WilTec Wildanger Technik GmbH Item 64740 Page 4 http://www.wiltec.de 11 2024-1...
- Page 5 Before screwing in the parts (H), note the difference between the version for the right side and the version for the left side. • You will need 4 bolts with nuts (L) for this assembly step. © by WilTec Wildanger Technik GmbH Item 64740 Page 5 http://www.wiltec.de...
- Page 6 Before screwing in the parts (G), note the difference between the version for the right side and the version for the left side. • You will need 12 screws with nuts (L) for this assembly step. © by WilTec Wildanger Technik GmbH Item 64740 Page 6 http://www.wiltec.de...
- Page 7 For additional stability, the frame is attached to the rear wall with part (F). • You will need a total of 4 bolts with nuts (L) for this assembly step. © by WilTec Wildanger Technik GmbH Item 64740 Page 7 http://www.wiltec.de...
- Page 8 Important note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 64740 Page 8 http://www.wiltec.de 11 2024-1...
Need help?
Do you have a question about the 64740 and is the answer not in the manual?
Questions and answers