Advertisement
Quick Links
Throttle Damper instructions
What's inside the package
I T E M
1. Damper
2. Fastener kit
– M5x22 allen head bolt
– M5x30 allen head bolt
– M5 washer
3. Allen key, 4mm
4. Spacer kit
– Front 4mm
– Rear 13mm
How to adjust the damper
To adjust the damper, push the rod to either inwards or pull outwards
against the end stop. Keep slightly pushing/pulling the rod and you should
feel it attaching to the bypass valve screw, which adjusts the damping rate.
By turning the screw clockwise the damping rate increases and vice versa.
Q T Y
1 pc
1 pc
1 pc
2 pc
1 pc
1 pc
1 pc
Advertisement
Summary of Contents for Simucube Throttle Damper
- Page 1 Throttle Damper instructions What’s inside the package I T E M Q T Y 1. Damper 1 pc 2. Fastener kit 1 pc – M5x22 allen head bolt 1 pc – M5x30 allen head bolt 2 pc – M5 washer 3.
- Page 2 The screw should move quite easily and excessive force should NOT be used, if the screw does not move any further. Warning If the damping rate is adjusted to maximum, the damper can be really difficult to move! This should be avoided and if excessive force is used, the damper can be locked in place.
- Page 3 Free returns Within 30 days Express shipping Within 2-6 Days...
Need help?
Do you have a question about the Throttle Damper and is the answer not in the manual?
Questions and answers