Environmental Conditions; Safety Instructions - AZ-Delivery ESP8266-12E Manual

Areas of application
The products are intended for the support and assembly of electronic components and circuits.
Required knowledge and skills
The use of these products requires basic knowledge of electrical engineering and the handling of electronic components.
Users should be able to install the products correctly and take the necessary safety precautions.

Environmental conditions

The products should be used in an environment free from moisture, dust and direct sunlight. They should not be operated
near heat sources or in chemically aggressive environments to avoid damage and safety risks.
Intended Use
Passive electrical products such as heat sinks, battery holders and clips or breakout boards should be operated in environ-
ments that meet the specified temperature and voltage ranges of the respective products. These components are typically
designed for indoor use.
Improper foreseeable use
Improper but foreseeable uses include use in humid or extremely hot environments or operation by untrained or disabled
persons. The product must be kept away from children and pets.
disposal
Do not discard with household waste! Your product is according to the European one Directive on waste electrical and
electronic equipment to be disposed of in an environmentally friendly manner. The valuable raw materials contained therein
can be recycled become. The application of this directive contributes to environmental and health protection. Use the col-
lection point set up by your municipality to return and Recycling of old electrical and electronic devices. WEEE Reg. No.: DE
62624346

safety instructions

Attention: Improper disposal of electronic components can endanger the environment and health. Note: Dispose of elect-
ronic components in accordance with local regulations and use appropriate recycling options. Attention: Chemically aggres-
sive media can damage the materials of the products. Note: Do not use the products in corrosive or chemically aggressive
environments. Attention: Improper disposal of electronic components can endanger the environment and health. Note:
Dispose of electronic components in accordance with local regulations and use appropriate recycling options. Attention:
Chemically aggressive media can damage the materials of the products. Note: Do not use the products in corrosive or chemi-
cally aggressive environments. Caution: Mechanical shock or bending can damage the products and connected components.
Note: Avoid mechanical stress and protect the products from physical influences. Attention: Inadequate fastening can lead
to malfunctions and damage. Note: Make sure all products are securely and firmly assembled. Caution: Damaged products
may pose safety risks. Note: Check products regularly for visible damage and replace defective parts immediately. Attention:
Overloading can lead to overheating and failure of the products. Note: Use the products only within the specified load limits.
Attention: Overheating can cause damage to the products and the connected electronic components. Note: Make sure that,
for example, heat sinks or components that heat up are adequately ventilated and that the specified temperature ranges are
not exceeded.