Download Print this page

WilTec 65152 Operation Manual

Mobile tank system 120 ℓ & pump 40 l/min

Advertisement

Quick Links

Operation Manual
Mobile Tank System 120 ℓ & Pump 40
min
65152
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 65152 and is the answer not in the manual?

Questions and answers

Summary of Contents for WilTec 65152

  • Page 1 Operation Manual ℓ Mobile Tank System 120 ℓ & Pump 40 ⁄ 65152 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
  • Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
  • Page 3 • Keep the user manual for future reference. If the device is passed on to third parties, the user manual must also be handed over. © by WilTec Wildanger Technik GmbH Item 65152 Page 3 http://www.wiltec.de 11 2024-1...
  • Page 4 Keep the device away from fire and heat sources, and do not expose it to direct sunlight for extended periods. • The device should be cleaned regularly to prevent the permanent accumulation of dirt. © by WilTec Wildanger Technik GmbH Item 65152 Page 4 http://www.wiltec.de...
  • Page 5 Outlet elbow for the hose Adapter for the tank opening Suction pipe with internal thread Suction pipe with external thread Suction pipe with male and female thread Base with filter © by WilTec Wildanger Technik GmbH Item 65152 Page 5 http://www.wiltec.de 11 2024-1...
  • Page 6 1. Loosen the fastening screw on the crank (see Fig. 1). 2. Secure the crank on the spindle of the pump housing. 3. Tighten the fastening screw so that the crank can move freely. © by WilTec Wildanger Technik GmbH Item 65152 Page 6 http://www.wiltec.de...
  • Page 7 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH...