Advertisement
Quick Links
Large - 72"W x 23"D x 32" to 44.5"H (adjustable height)
Small - 44"W x 23"D x 32" to 44.5"H (adjustable height)
Read all instructions and warnings before proceeding.
If you do not understand any portion of the instructions,
do not attempt assembly;
EMAIL : customerservice@kindredproducts.net
Call : (866) 456-0866.
This Use & Care Guide Guide provides instructions on
how to assemble and use your Everest
It is critical that the Work Table be assembled correctly
and according to the instructions.
The product is intended for use in working areas including
offi ces, homes, craft rooms, garages, etc.
Work Tables
Use & Care Guide
Work Table.
™
Maximum weight capacity
of 750 lbs evenly distributed
WARNING!
1. Strictly follow all instructions to avoid an accident,
damage to property, personal injury, or death.
2. Do not sit, stand, or climb on work table and do not let
children do so. Components might fail, causing a person
to fall, possibly resulting in serious injury or death.
3. FOR CALIFORNIA RESIDENTS ONLY - WARNING:
Cancer and reproductive harm. For full information, go to
www.P65Warnings.ca.gov.
It is the consumer's responsibility to:
• Assemble this system in accordance with provided
instructions
• Maximum weight capacity of 750 lbs evenly distributed
• Failure to follow warning could result in serious injury
Advertisement
Summary of Contents for Everest Work Table Large
- Page 1 Call : (866) 456-0866. 3. FOR CALIFORNIA RESIDENTS ONLY - WARNING: This Use & Care Guide Guide provides instructions on Cancer and reproductive harm. For full information, go to how to assemble and use your Everest Work Table. www.P65Warnings.ca.gov. ™...
-
Page 2: Box Includes
Preparation 1. Find a soft surface for the assembly process You may need to avoid any scratching (e.g. on top of a rug, a carpet, or the broken down shipping box). Phillips Screwdriver • 2. One-person assembly is suggested or feel free to invite a friend or family member to help assemble. - Page 3 STEP 1 Place the Wood Top (Small or Large) upside down on a clean surface (or leave in the box where is protected). Take 1 leg assembly (with feet upright) and attach 1 thumb screw into the nut on the underside of the Wood Top (See magnifi...
- Page 4 STEP 3 With the Work Table still in the upside down position, attach Corner Caps (4) to each corner of the Work Table. Align the Corner Cap (D) with the Work Table Frame and the Corner Bolts (A). Push inwards until the Corner Cap snaps into place.
- Page 5 STEP 5 Each leg has 2 Thumb Screws (C) to adjust the Work Table height. The Work Table ranges from 32" to 44.5" height at 1.8" increments. In either position, the Work Table legs may be adjusted, though it is recommended to adjust with the table upside down.
- Page 6 STEP 6 Have a friend or family member assist to carefully fl ip the Work Table to the upright position and move to the desired location. To ensure your table sits level, simply twist the leveling feet at the bottom of each table leg, either clockwise or counter-clockwise, depending on whether you need to raise or lower that corner of the table.
- Page 7 Wipe with soft cloth and a mild dish soap to keep work tables clean. Dry immediately with a soft, clean cloth. Scan for CONTACT INFORMATION Warranty EVEREST WORLD HEADQUARTERS Information Kindred Products LLC 2460 M-139 Suite B Benton Harbor, MI 49022-6444 Mailing Address P.O.
Need help?
Do you have a question about the Work Table Large and is the answer not in the manual?
Questions and answers