Do you have a question about the MMOC-EVO-08 and is the answer not in the manual?
Questions and answers
Summary of Contents for Mishimoto MMOC-EVO-08
Page 1
INSTALLATION GUIDE Dual Oil Cooler, Fits EVO X SKU: MMOC-EVO-08 TABLE OF CONTENTS RESOURCES & CONTACT Pg 1 CALL 1-877-GOMISHI RESOURCES AND CONTACT INFORMATION CUSTOMER SERVICE HOURS: MON–FRI 8:30AM–5:00PM EST Pg 2 IMPORTANT SAFETY INFORMATION MISHIMOTO PARTS LIST REQUIRED TOOLS...
Page 2
› Please dispose of any liquids properly › Mishimoto is not responsible for any vehicle damage or personal injury due to installation errors, misuse, or removal of Mishimoto products › If you need any assistance while installing our products,...
Page 3
INSTALLING THE MISHIMOTO OIL COOLER splash shields. First, remove the 10mm crash-beam bolt on the passenger side, as shown below. This will be used to secure the Mishimoto Oil Cooler. Remove the 10mm bolts on each side, holding the front bumper to the fender.
Page 4
IMPORTANT SAFETY INFORMATION & INSTALLATION INSTRUCTIONS Attach the braided lines to the Mishimoto Oil Cooler but do not Adjust the bracket so the upper fitting does not contact the frame. tighten them. The longer line goes to the top of the oil cooler.
Page 5
Shut the vehicle off and check the oil level. The dual-core oil coolers’ extra capacity might require you to add oil. Congratulations! You have successfully installed the Mishimoto EVO X Dual Oil Cooler Kit. Ensure no parts are rubbing, and then tighten all connections.
Need help?
Do you have a question about the MMOC-EVO-08 and is the answer not in the manual?
Questions and answers