Advertisement
Quick Links
Advertisement
Related Manuals for MDD OGI DRIVE
Summary of Contents for MDD OGI DRIVE
- Page 1 OGI DRIVE desk with electric height adjustment Assembly manual..................... Electric desk control manual................7-16...
- Page 2 12-238 06-059 06-076 06-105 06-282 SINGLE DESK...
- Page 3 12-238...
- Page 4 06-059 06-282 06-282...
- Page 5 06-076 06-282...
- Page 7 Controlling the electrical desk Ogi Drive / Ogi One / Compact Drive General Information ..................Ogi Drive Desk Controllers ................Compact Drive Desk Controller ................ Ogi One Desk Controller .................. Desk Calibration ....................Resetting Desk Settings ..................Basic Control Panel ..................
-
Page 8: General Information
The height adjustment range of the worktop depends on the type of legs (one- or two-step) used in the desk. A different controller is used for each leg type. Ogi Drive Desk Controllers 1. Ogi Drive desks with one-step leg Model: GENIUS EU v500 ż ver.2 www.ergomaster.eu One-step leg v500 ż... - Page 9 Compact Drive Desk Controller Model: GENIUS EU v650N ż 580-1230 www.ergomaster.eu v650N ż controller Ogi One Desk Controller For Ogi One desks, we use the leg stem with so-called “whiskers”. The controller has “N” in its index. Model: GENIUS EU v650N ż 580-1230 www.ergomaster.eu v650N ż...
-
Page 10: Basic Control Panel
Desk Calibration 1. Calibrate your desk before using it for the first time! 2. 2. Make sure your desk is plugged in and that all cables are well connected. 3. 3. Until the calibration is complete, the panel will not respond to the other buttons being pressed. 4. -
Page 11: Pro Control Panel
PRO Control Panel PRO Panel - mounted under the worktop, there’s a possibility to adjust the panel’s extension. Allows for: setting the anti-collision sensitivity in three levels: Low, Medium, High, or turning it off completely, 2. programming 4 heights of the worktop, 3. - Page 12 Setting the minimum and maximum heights with the PRO panel Minimum height Set the desk to the selected minimum height. 2. Hold the “S” and „-” buttons for 4 seconds. Maximum height Set the desk to the selected maximum height. 2.
- Page 13 All options of the PRO Control Panel Buttons Holding time Action upward movement downward movement HEIGHT MEMORY current height saved as 1 current height saved as 2 Press “S” first, then a number current height saved as 3 current height saved as 4 SETTING THE SAVED HEIGHT worktop moves to saved height 1 worktop moves to saved height 2...
- Page 14 Round Control Panel Round panel, built-in the worktop, has the following functions: setting the anti-collision sensitivity in three levels: Low, Medium, High, 2. programming 4 heights of the worktop, 3. setting a minimum and maximum height. Panel operation Enter menu Confirm selection Moving through the MENU All positions in the MENU:...
- Page 15 Reset settings Round panel allows the settings to be rest to factory settings. In order to do this: Enter the menu „ ”, 2. select the “MENU” option with the “S” button, 3. select the “RESET” option with the “S” button, 4.
- Page 16 Information on the software version To find out the software version, please: Enter the menu “ ”, Select the “MENU” option with the “S” button, 3. Select the “INFO NET” option with the “S” button, 4. Information on the software version will appear. MENU UNIT INFO...
Need help?
Do you have a question about the OGI DRIVE and is the answer not in the manual?
Questions and answers