Tektronix 7D02 Instruction Manual page 61

I,DISPLAY~
Displays the contents of the acquisition memory .
TACO MEM -
PROGRAM
Displays the contents of program memory .
Learning Guide-7D02 Operators
STORING AND DISPLAYING MEMORY WITH IMMEDIATE
MODE COMMANDS
Storing data and programs in memory and retrieving information from memory isathree-keystroke sequence .
The first key is always the
I MMEDIA~E
rkey . It is followed by one of the two-keystroke sequences listed below.
The second key specifies
the
destination of the information. The third key specifies the source of the
information. The resulting command is shown in the Immediate mode area at the bottom of the screen .
STORE MEM~
Stores the program in storage memory . Swaps programs if STOREMEM contains a
PROGRAM -,
program .'
STORE MEM~
Stores the current data (residing in onE of the acquisition memories) in storage memory .'
ACO ME
DISPLAY
STORE ME
Displays the contents of storage memory .
~ These commands require moving the cursor to the EXECUTE field in order for the command to be executed .