WELCOME We thank you for your confidence in us and we wish you many good times to come with your new COMMENCAL bike. This manual will help you to get to know your bike and includes some useful information and detail.
Tightening the stem clamp Removal of the caliper pad spacer MAINTENANCE Front wheel assembly with 15mm axle Before and after every ride Front wheel assembly with 20mm axle Monthly/Yearly Front wheel assembly with 9mm axle SECURITY WARNING Align the stem/accessories/saddle COMMENCAL / P.04...
Page 5
Meta HT AM, Meta HT KIDS, Models: Ramones Kids : Meta TR. Supreme, Furious, Absolut. -Ramones 16 Chrome, -Ramones 16 Lagoon. Incorrect use of your bike can be dangerous. You risk to cause damage or brake your bike and the components. COMMENCAL / P.06...
-Kid bike 20” - 24 : 45 kg You can find this manual on You are responsible for the -Junior bike : 65 kg the COMMENCAL Bicycles safety of the child during use. This inclues regular checks website. You can also find...
USEFUL NOTES NOTES COASTER BRAKES COMMENCAL Bicycles are Note to parents: explain to your not necessarily designed for child how the coaster brake use with a luggage rack works before they use the bike and/or child seat and/or a for the first time.
– 1x HIGH PRESSURE PUMP Torque tightening indicated for for your fork and rear shock, fixing the handlebar and stem. if air sprung. For frame contact system, please refer to relevant bolt marking for torque information. COMMENCAL / P.09...
(lift it by the fork so that rear wheel the bike is and fork). stable. When unpac- king or moving the handlebar, take care not STEP 3 to damage the Remove any cables or hoses. protective packaging. COMMENCAL / P.10...
Page 10
Ride Alpha on the lower 40mm, part. (without tighten the tightening). lower part Align your of the stem handlebar on the upper using the laser crown. marking. COMMENCAL / P.11...
Page 11
STEP 5 gap where Tighten the marked. front cover Secondly, of the stem tighten the or the upper frontmost part. stem bolts. Ensure equal spacing nbetween the front cover and the body of stem in all 4 positions. COMMENCAL / P.12...
Page 12
Refer to the 2) Assemble manufacturer the front manual if the wheel into the lever does not fork. Install align verticaly the front axle to change the and tighten. setting. COMMENCAL / P.13...
Page 13
(1). fork. Grease Then tighten and install the the pinch bolt axle. (2). The detail information for assembly of the Refer to the Rockshox manual for precise torque axle is written on the axle body. instruccions. COMMENCAL / P.14...
Page 14
3) Close the tight with lever half way no play. If and tighten not, repeate the axle nut the previous by hand. steps. Make sure when you tighten the wheel, the hub is sat correctly in the fork. COMMENCAL / P.15...
To do so, unscrew the Stick on rear wheel any frame protection nuts, install the stabilisers given, such as and tighten the seatstay the nuts. protector. COMMENCAL / P.16...
To set your saddle positon, unscrew bolts (A and B). First, set the lateral position along the rails to your preference. Second, tighten to achieve a horizontal orientation. Your dropper seatpost should be actuated to complete this set-up. COMMENCAL / P.17...
(exception: UK, brakes 20 to 30 times to slow down from 30 km/h to 5 km/h to break fully broken in. Australia, New Zealand and Japan use an opposite brake configuration). COMMENCAL / P.18...
Page 18
Brakes are refer to the corresponding ma- the rim. with the rim. If not, repeat the an important security element, nufacturer’s website. Please refer to the correspon- process. and require correct and careful ding manufacturer’s website. set-up. COMMENCAL / P.19...
If you can not achieve the correct recommendations found on SAG setting on your coil shock, you should change the coil. the side walls of the tires. This will include the maxium and minimum pressure. COMMENCAL / P.20...
Adjust so that you achieve largest cassette ring. cable. advice from a the correct limitation without professional. compromising gear range. COMMENCAL / P.21...
Do not remove or add Make sure your wheel sits straight Respect the torques provided and spacers to the stack. in the drop outs and is aligned with be sure that all the controls are your frame. working and reachable. COMMENCAL / P.22...
- Specific air pressure in stem, cockpit, levers, headset, Check your brakes: they should suspension and tires. derailleur, wheels and so on... work correctly and the levers - Cockpit and controls should not feel too hard or too position adjusted. soft. COMMENCAL / P.23...
Page 23
4) Align your stem with the and place your other hand on 2) Tighten the topcap to 3N.m frontwheel. the headset. Keep your brake maximum. 5) Tighten the stem bolts. activated and move your bike forward and backward. COMMENCAL / P.24...
Check that your tires are well inflated (better to do so with LUBE YOUR CHAIN a pump with an air pressure After washing your bike, apply gauge). some specific lubricant to your chain. COMMENCAL / P.25...
If you ride with a damaged wheel you can break yoour wheel and professional. hurt yourself. COMMENCAL / P.26...
Page 26
- For the French market, the installation of impact, you should return your component to lighting, reflecting and warning devices are the manufacturer for inspection or destroy and compulsory to ride on public roads as per local replace it. road regulation. COMMENCAL / P.27...
Page 27
If the your bike or to your health. design life of a component has been exceeded, it may result in sudden failure and personal injury. COMMENCAL / P.28...
Page 28
Fax: + 376 73 74 90 AD400 La Massana PRINCIPAT D’ANDORRA Site / Website: www.commencal.com Du lundi au vendredi de 9h à 13h et de 15h à 19h / Information / Information: info@commencal.com Monday to Friday from 9 AM to 1 PM and 3PM to 7PM Communication / Media - Press: customerservice@commencal.com...
Need help?
Do you have a question about the FCB and is the answer not in the manual?
Questions and answers