Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Chewy frisco 574806
Summary of Contents for Chewy frisco 574806
- Page 1 Modern Aviary Pet Bird Habitat Instruction Manual Sku# 574806 FOR PET USE ONLY...
-
Page 2: Parts Included
Assembly Please Read Through All Instructions Before Starting Prior to assembling your new habitat, we recommend following these instructions step by step. Make sure all parts are ready before you start assembly. Identify and locate each of the components listed below. Parts Included A x 1pc B x 1pc... - Page 3 Assembly Please Read Through All Instructions Before Starting Step 1 Position Parts (A) & (B) with the latches facing outward, to attach Parts (J) & (K). Be sure that Part (J) faces back with the hole on outside, and that Part (K) is aligned to the middle hole. Secure using provided screws and hex key.
- Page 4 Assembly Please Read Through All Instructions Before Starting Step 3 With the help of another person, flip the habitat so its back side is facing up. Insert Part (F) inside the bottom of the main frame to attach. Secure using provided screws and opposite end of hex key. 6pcs Step 4 Slide Part (M) into the slot above Part (K).
- Page 5 Assembly Please Read Through All Instructions Before Starting Step 5 Lay Part (G) on top of the support beams and Parts (A) & (B). Be sure to align the holes. Place the four brackets on the corner points in the middle panel with the foam against Part (G). Then, secure Part (G) to Parts (A) &...
- Page 6 Assembly Please Read Through All Instructions Before Starting Step 7 With the help of another person, flip the habitat right side up. Slide Parts (N) & (O) into the slot above the storage doors. Be sure that Part (N) is on top of Part (O). Step 8 Insert the preinstalled screw heads on Parts (C) &...
- Page 7 Assembly Please Read Through All Instructions Before Starting Step 9 With latches and dowels facing up, align the preinstalled hardware on Part (H) to Part (I). Using the hex key, interlock the parts together by tightening the three points. Step 10 Turn over Part (I) and place on top of the structure.
- Page 8 Assembly Please Read Through All Instructions Before Starting Step 11 Open the doors on Part (E) to reveal storage space. Attach the two magnets on the inside, being sure to insert the dowels into the four holes. To install the two handles, secure with provided screws and opposite end of hex key. 2pcs Step 12 To open and close the front doors, pinch the bolts towards each other.
- Page 9 Assembly Please Read Through All Instructions Before Starting Step 13 With the front doors open, install Part (P) by inserting the wing bolt from the outside, through the wire bars. Be sure to tighten until secure. Then, install Part (L) by inserting the wing bolt from the outside, above crossing wire bars. Be sure to tighten until secure. Step 14 Install Part (Q) by placing the U-shaped bracket and wing on the outside of the wire bars.
-
Page 10: Warnings And Cautions
Assembly Please Read Through All Instructions Before Starting Assembly Complete Warnings & Cautions • For pet bird use only. Not intended for children, dogs, or cats. • Keep out of reach of children. • Please remove all packaging before use. •...
Need help?
Do you have a question about the frisco 574806 and is the answer not in the manual?
Questions and answers