Advertisement
Quick Links
ASTRATEC
12 VOLT AUTOMATIC BATTERY CAPACITY TESTER.
CONTENTS:
1.0
Product Introduction. .......................................................................................................... 2
2.0
Controls and displays......................................................................................................... 2
3.0
Testing a battery & printing test report .............................................................................. 3
4.0
Battery Discharge run time chart ....................................................................................... 3
5.0
Warranty ........................................................................................................................... 4
6.0
Recalibration ..................................................................................................................... 5
7.0
Helpline. ............................................................................................................................. 5
RAPID BATTERY TESTING AND CHARGING SOLUTIONS.
ASTRATEC ELECTRONICS LTD, 2-3 JAMES WATT CLOSE, DRAYTON FIELDS,
3911R1 OPERATING GUIDE
Operating guide
DAVENTRY, NORTHANTS, NN11 8RJ, ENGLAND.
T: +44 (0) 1327 705936
www.astratec.co.uk
Model 3911R
3911R11
F: +44 (0) 1327 877608
sales@astratec.co.uk
Page 1
PAGE
07/12/2015
Advertisement
Summary of Contents for ASTRATEC 3911R
- Page 1 Warranty ........................... 4 Recalibration ........................5 Helpline..........................5 RAPID BATTERY TESTING AND CHARGING SOLUTIONS. ASTRATEC ELECTRONICS LTD, 2-3 JAMES WATT CLOSE, DRAYTON FIELDS, DAVENTRY, NORTHANTS, NN11 8RJ, ENGLAND. T: +44 (0) 1327 705936 F: +44 (0) 1327 877608 www.astratec.co.uk sales@astratec.co.uk...
-
Page 2: Product Introduction
A summary test report with battery discharge chart can be printed on an optional till roll printer (Astratec part EPT1). The last test result is automatically saved by the tester and can be recalled and reprinted as required. - Page 3 ( 4x AA) if the green led on the printer front panel is flashing this indicates these batteries need recharging ! To do this simply plug the printer into the 3911R tester and connect the tester to a charged battery. The printer will fully charge from the tester in around 10 hours.
- Page 4 Times shown are approximate, for best results test a good, fully charged battery and discharge on the 3911R. The time obtained can then be used as a “ benchmark “ which will take into account the type of battery you are using and also the charger type and recharge efficiency.
-
Page 5: Warranty
The purchaser agrees to assume all liabilities for any damages and/or bodily injury that may result from the use or misuse of this device by the purchaser, his employees or agents. Astratec shall not be liable in any way for consequential damage resulting from use of this device.
Need help?
Do you have a question about the 3911R and is the answer not in the manual?
Questions and answers