Advertisement
Quick Links
Instructions
Rely Table
&Tradition
2022
Congratulations on your new
2022 by &Tradition. We hope you will enjoy using
this product. Please follow these instructions to ensure
correct installation. If you have any questions or
comments, please do not hesitate to contact us by
mail at: info@andtradition.com
ATD4 & ATD5
Rely
table, designed in
Advertisement
Related Manuals for &Tradition Rely ATD4
Summary of Contents for &Tradition Rely ATD4
- Page 1 Instructions Rely Table ATD4 & ATD5 &Tradition 2022 Congratulations on your new Rely table, designed in 2022 by &Tradition. We hope you will enjoy using this product. Please follow these instructions to ensure correct installation. If you have any questions or comments, please do not hesitate to contact us by mail at: info@andtradition.com...
- Page 2 Rely Table ATD4 & ATD5 Please read these instructions carefully and retain them for future reference to ensure the product is used correctly. Hee Welling For your own safety, please study each step of this instruction manual first. &Tradition is not responsible for 2022 any faults or damages caused by not following these in- structions correctly.
- Page 3 Step 1 Place the tabletop support (B) on the top of the column and align the x3 holes with the corresponding holes in the column. Place the x3 short hex screws (F) in the appointed holes and fasten them clockwise with the small allen key provided (I).
- Page 4 Step 4 On flat and level gound, tip the table up on one edge. Make sure that two feet remain touching the ground. Once the tabletop and feet are aligned, firmly tighten the screw. Step 5 Flip the table over and place carefully on the floor. Adjust the feet accordingly.
Need help?
Do you have a question about the Rely ATD4 and is the answer not in the manual?
Questions and answers