Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for XF ROBOT Z-6C
- Page 1 V3.0 Z-6C 2023.05 User Manual ©2023 XF All Rights Reserved...
-
Page 2: Using This Manual - Legend
Using this Manual – Legend Important Tips Explanation... - Page 3 Caution 1. When not in use, store the Z-6 in the package box. The recommended storage environment is a relative humidity less than 40% at a temperature of 20±5° C. If the lenses fog up. The water vapor will usually dissipate after turning on the device for a while.
-
Page 4: Table Of Contents
Catalog Introduction Synopsis Characteristics Installation Disassembly Pod Controls Calibration & Firmware Upgrade Adjust Software Installation &Settings Calibration Updating Configuring Video Stream Address Log in to the Web Interface Video Network Protocol Video Playing Windows Version Android Version Appendix 1 Specifications... -
Page 6: Introduction
The Z-6C equips with a high-accuracy 3-axis gimbal and a 20.35M pixels 1500x hybrid zoom camera, which presents scene hundreds of meters away. Thanks to the starlight night vision function, the Z-6C can provide a clear image even in dim environments. The Z-6C can be mounted tool-lessly onto unmanned aerial vehicles with its quick-release port. -
Page 7: Installation
Z-6 User Manual Installation Turn the locking knob to release position, and push the pod along the guide rail at a constant speed until it makes a slight "click". Turn the locking knob to lock position. Make sure the load is installed and locked after installation! Do not install or remove the load while it is powered on, otherwise it may cause... -
Page 8: Calibration & Firmware Upgrade
Z-6 User Manual Calibration & Firmware Upgrade Adjust Software Installation & Settings 1. Install the driver of the config module. Win32 runs: CP210xVCPInstaller_x86.exe Win64 runs: CP210xVCPInstaller_x64.exe 2. Connect the update port of the gimbal and the computer with the config module. -
Page 9: Calibration
Z-6 User Manual Calibration Keep the pod still and click "Gyroscope calibration". When the "calibration success" is displayed in the lower left corner of the software, the calibration is complete. Updating Firmware upgrade steps: 1. Power on the pod and ensure that the pod and software have been successfully connected. -
Page 10: Configuring
Z-6 User Manual Configuring Video Stream Address rtsp://192.168.144.108.554 Log in to the Web Interface http://192.168.144.108/ Account: admin Password: admin Video Video Management: NANJING XIANFEI ROBOT TECHNOLOGY CO., LTD. -
Page 11: Network Protocol
Z-6 User Manual Network Protocol TCP/IP： GB28181： NANJING XIANFEI ROBOT TECHNOLOGY CO., LTD. -
Page 12: Video Playing
Z-6 User Manual Video Playing Use the Dragonfly Pod display control software, or enter the stream address in the streaming media player such as VLC, EasyPlayer, etc., to play the video. Make EasyPlayer as an example: Windows Version EasyPlayer operation steps are as follows: 1. -
Page 13: Appendix 1 Specifications
Z-6 User Manual Appendix 1 Specifications Item Parameters Dimensions 154 x 100 x 167mm Weight 710g General Operating Voltage 20~53V Power 10W (AVG) / 40W (Stall) Protection Rating IP43 Angular Vibration Range ±0.01° Maximum Controllable Gimbal Pitch: ±200° /s, Yaw: ±200° /s Speed Pitch: -120°～... - Page 14 Z-6 User Manual Item Parameters Person: 386.1m EN62676-4:2015 Object Identification Vehicle: 625.9m Person: 5513.5m Distance Johnson Criteria Vehicle: 16908.1m Zoom Person: 193.1m Camera EN62676-4:2015 Vehicle: 313.0m Object Verified distance Person: 2756.8m Johnson Criteria Vehicle: 8454.1m Output Video 1080P@25fps Resolution Store Video Resolution 4K@25fps Image Resolution 6016 x 3384 Image &...
Need help?
Do you have a question about the Z-6C and is the answer not in the manual?
Questions and answers