Advertisement
Quick Links
Description TR – D
Electronic double thermostat with heat curve in a DIN standard bar enclosure
1. Short Description
The electronic double thermostat serves to control electric heating panels used for
piglet nest heaters. Two independent control circuits have been integrated into the
device; both record the actual temperature by means of a temperature sensor and
enable a relay output in accordance to the settings. The electric heating panels are
controlled directly via the output.
2. Operating Elements
1
Connecting terminals for mains supply and load
2
Output signal indicator for the relays; mains voltage on (LED)
3
Temperature indicator
4
Connecting terminals for the sensors
5
Buttons for operating/programming
6
Dial potentiometer for operating/programming
MIK INTERNATIONAL GmbH & Co. KG
Masselbachstr. 22
56235 Ransbach-Baumbach
Germany
Phone: +49 2922 885600
Fax:
+49 2922 885670
E-Mail:
info@mik-online.de
Internet: www.mik-online.de
78385 270607
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for MIK TR-D
- Page 1 Output signal indicator for the relays; mains voltage on (LED) Temperature indicator Connecting terminals for the sensors Buttons for operating/programming Dial potentiometer for operating/programming MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22 Fax: +49 2922 885670...
- Page 2 By pressing the CHx button again, the process is stopped again. The timer is thus reset, the set value – which is momentarily displayed – is at ‘tE..’ and the decimal point will light up continuously again. MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22...
- Page 3 CH2, and will switch back to the previous mode of operation. Changes cannot be made to a current heat curve; this can also not be interrupted by the submenu being entered. MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22...
- Page 4 3.8. Supply Voltage The device is designed for connection to an alternating current of 23OV/5OHz. It has no on/off switch; it is only intended for connection to permanently installed lines. MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22...
- Page 5 If the device does not work, please check it has been connected properly first and check the power supply. MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22...
- Page 6 Dimensions: 70 x 90 x 75 mm (4* machine width) Mounting: on DIN bars Weight: approx. 230g MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22 Fax: +49 2922 885670 56235 Ransbach-Baumbach E-Mail: info@mik-online.de...
-
Page 7: Dimensioned Drawing
6. Dimensioned Drawing MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22 Fax: +49 2922 885670 56235 Ransbach-Baumbach E-Mail: info@mik-online.de Germany Internet: www.mik-online.de... - Page 8 7. Circuit Diagram Sensor Sensor Circuit 1 Circuit 2 Maximum 18 thermo E per heating circuit! Subject to changes MIK INTERNATIONAL GmbH & Co. KG Phone: +49 2922 885600 Masselbachstr. 22 Fax: +49 2922 885670 56235 Ransbach-Baumbach E-Mail: info@mik-online.de Germany...
Need help?
Do you have a question about the TR-D and is the answer not in the manual?
Questions and answers