Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for LILYGO T-Deck Case
Summary of Contents for LILYGO T-Deck Case
- Page 1 T-Deck Case Assembly Guide Suggested Tools: 1.5mm hex screwdriver Needle nose pliers...
- Page 2 Front Case Assembly Mid-Frame Rear Case Assembly Package Inclusions Slider Switch Extension (x2) TOP M2x12mm / (x2) Bottom M2x10mm [or M2x8mm] (x4) M2 Nuts IPEX to SMA Battery Holder Female Pigtail...
- Page 3 Remove rear case assembly from mid-frame and front case assembly.
- Page 4 Remove pigtail from mid-frame and front case assembly by unscrewing hex nut.
- Page 5 Disconnect speaker connecter from your T-Deck device.
- Page 6 Use a tool, such as a spludger, to gently remove the speaker from the T-Deck. ***Warning - Be careful not to damage the ribbon cable right next to the speaker.***...
- Page 7 Insert the Slider Switch extension into the midframe.
- Page 8 Insert the T-Deck into the Mid-Frame and Front Case Assembly starting with the type-c port. Make sure the slider switch slot aligns properly before pushing the T-Deck into place. ***Warning excessive force may damage T-Deck.***...
- Page 9 Reconnect Reconnect IPEX Connector IPEX Connector Insert pigtail into Mid-Frame and Front Case Assembly and secure with washer and hex nut.
- Page 10 Remove battery adhesive and insert MakerFocus 3000mAh battery into Battery Holder. Insert speaker face down into Rear Case Assembly. *Note - For other batteries simply remove Battery Holder.
- Page 11 Insert M2 nuts into designated holes in Rear Case Assembly.
- Page 12 Press the M2 nuts into the Rear Case Assembly and ensure the holes properly align.
- Page 13 Plug the speaker & battery connector into their designated ports, then close the Rear Case Assembly onto the rest case. *Warning- Check for pinch points on the wires.*...
- Page 14 M2x12mm Secure the case together with the (x2) M2x12mm screws on top & (x2) M2x8mm or M2x10mm on the bottom. M2x8mm or M2x10mm...
Need help?
Do you have a question about the T-Deck Case and is the answer not in the manual?
Questions and answers