Galvin Specialised CWC-156FF-STJ-AM Product Installation Manualline

Wallgate anti-ligature, a/v disable s/surface btw pan s&p w/ grey integral seat with front brackets

Advertisement

Wallgate Anti-Ligature, A/V Disable S/Surface BTW
Pan S&P w/ Grey Integral Seat With Front Brackets
PRODUCT CODES:
CWC-156FF-STJ-AM
CWC-156FF-STW-AM
1. Disclaimer
Every effort has been made to supply information within this manual which is correct. Galvin Engineering Pty
Ltd and Wallgate Limited will not be liable for any damage or loss that arises if the person installing, operating,
or maintaining the unit has not read or not complied with the manual.
In any event, and without prejudice to any warranties in Galvin Engineering and Wallgate Limited's terms and
conditions of sale, Galvin Engineering and Wallgate Limited's liability for all damages and losses (including
negligence) shall not in any circumstances exceed the amount paid by the customer for the unit.
Galvin Engineering and Wallgate reserves the right to alter, update or improve its product specification at any
time without prior notice. This manual is specific to the product that it has been supplied with at the date of
supply.
Without prejudice to any warranties in Galvin Engineering and Wallgate Limited's terms and conditions of sale,
any warranty will be invalidated if the equipment is installed or serviced by unqualified personnel.
No part of this publication and the information contained may be reproduced, transmitted, stored in a retrieval
system, used or disclosed wholly or partly without prior written permission from Galvin Engineering and
Wallgate Limited.
For full warranty details please see Galvin Engineering Wallgate Limited Terms and Conditions.
Please ensure this manual is passed to the end user. The manual forms an integral part of the product and
should be kept for its working life. Additional copies of this and other supporting documents are available by
contacting Wallgate Ltd or by visiting www.wallgate.com
2. Technical Specifications
Weight (kg)
Dimensions
Water Supply
Soil pipe connection (mm)
Flush pipe inlet
Flushing device flow requirements
50
Refer to CWC model drawing supplied separate to these instructions
Refer to the applicable product manual for the WC flush device
105/108mm (external diameter) male spigot
55mm internal diameter female for 1.5" size pipe & pipe seal. (as
supplied with flushing device)
Cistern flush: 1.85 – 2 Litres per second.
Direct flush: 1.5 Litres per second (nominally).
Refer to flushing device product information for full details.
1
st
Version 1,31
August 2020, Page 1 of 7
Version 0, 13 September 2021, 1
Version 1, 13 September 2021, 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CWC-156FF-STJ-AM and is the answer not in the manual?

Questions and answers

Summary of Contents for Galvin Specialised CWC-156FF-STJ-AM

  • Page 1 Wallgate Anti-Ligature, A/V Disable S/Surface BTW Pan S&P w/ Grey Integral Seat With Front Brackets Version 0, 13 September 2021, 1 PRODUCT CODES: Version 1, 13 September 2021, 1 CWC-156FF-STJ-AM  CWC-156FF-STW-AM  1. Disclaimer Every effort has been made to supply information within this manual which is correct. Galvin Engineering Pty Ltd and Wallgate Limited will not be liable for any damage or loss that arises if the person installing, operating, or maintaining the unit has not read or not complied with the manual.
  • Page 2: Numbered Procedures

    Version 1,31 August 2020, Page 2 of 7 3. Optional Control Unit Specifications Power supply 230V AC 50/60Hz 2 Amp single phase Version 0, 13 September 2021, 2 USA / CANADA: 120V AC 2Amp, 60Hz for models WDCA100 and WDCA200. Power rating (W) Maximum power rating 60 Weight (kg)
  • Page 3: Site Preparation

    Version 1,31 August 2020, Page 3 of 7 5. Installation 5.1. Package Contents Before you begin the installation, make sure that you have the following items: Version 0, 13 September 2021, 3 Product Manual  CWC Water Closet   Wall and Floor Fixings Required tools ...
  • Page 4: Preparing & Fitting The Water Closet

    Version 1,31 August 2020, Page 4 of 7  A mains cold water supply should be provided and terminated with a suitable isolating tap for connection to the flushing device. Refer to the product instructions of the flushing device for details of connection sizes and water supply ratings for pressure &...
  • Page 5 Version 1,31 August 2020, Page 5 of 7 Correct marking position Version 0, 13 September 2021, 5 Version 1, 13 September 2021, 5 4. Slide the pan onto the wall, taking care to make 5. Test the position of the brackets by marking sure the inside edges of the pan are straddling the them with a drill bit through the pre-drilled pilot brackets.
  • Page 6 Version 1,31 August 2020, Page 6 of 7 8. Fit the flush pipe seal provided with the flushing device into the top hole on the back of the WC pan. 9. Locate the CWC outlet spigot into the soil pipe connector and position the WC into place (with the extension if Version 0, 13 September 2021, 6 applicable).
  • Page 7: Maintenance

    Version 1,31 August 2020, Page 7 of 7 7. User and Maintenance Instructions 7.1. Operation Version 0, 13 September 2021, 7 The CWC can be used in conjunction with various types of flushing devices and/or controls. Refer to the instructions provided with those products for full details regarding operation & set up. 7.2.

This manual is also suitable for:

Cwc-156ff-stw-am

Table of Contents