NEC MOBILE TERMINAL EX User Manual page 19

Single Docking Station EX
Single Docking Station EX Part Names
The names and functions of Single Docking Station EX parts are described below.
(1) Insertion port
(5) Power switch
(6) AC adapter connector
(1) Insertion port
(2) Power lamp
(3) Connecting detection lamp
(4) Connection terminal
(5) Power switch
(6) AC adapter connector
(7) USB connector
(8) LAN port
(9) Stand
(2) Power lamp
(3) Connecting detection lamp
(4) Connection terminal
Insert Mobile Terminal EX into the port.
CAUTION
Do not insert any device other than Mobile Terminal EX into the port.
Failure to follow it may cause electric shock, fire or fault to occur.
Goes on if the power is turned on.
Lights while Mobile Terminal EX is inserted to the insertion port.
Used for charging or communication of Mobile Terminal EX.
Used to turn on or off the power of Mobile Terminal EX.
Used to connect Mobile Terminal EX with the AC adapter.
Used to connect Mobile Terminal EX with a USB device.
Put the USB connector cap on the USB connector if not used.
Used to connect Mobile Terminal EX with the LAN.
Put the LAN port cap on the LAN port if not used.
Allows the tilt of the station to be adjusted.
- -
18
(7) USB connector (8) LAN port
(9) Stand