Related Manuals for Zenty ZT-106
Summary of Contents for Zenty ZT-106
- Page 1 Zenty | Professional A/V Solution Provider [V1.0] User Manual 48 Port Gigabit Ethernet Switch ZT-106 | ZT-IPS48 ZENTY ® 9807 EMILY LANE STAFFORD, TX 77477 (844) 200-1945 SUPPORT@ZENTY.COM...
-
Page 2: Table Of Contents
7.4 Firmware Upgrade 7.5 System Reboot 7.6 Restore Factory Default Settings 8. Port Cable Test 9. Maintenance 10. Warranty 11. Mail-In Service 12. Limited Warranty Limits and Exclusions (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 2 of 18... -
Page 3: Introduction
1. Introduction The ZENTY ZT-IPS48 provides 48 ports for you to customize as input or output ports (47 and 48 are for management by default), and ultimately custom tailor your own AV over IP matrix. Use the ZT- IPS48 as a standalone matrix or integrate the switch in to your existing network. Making routing changes and creating routing presets has never been easier with the new and improved web GUI interface. -
Page 4: Typical Applications
4. Typical Applications 4.1 One To Many (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 4 of 18... -
Page 5: Many To Many
4.2 Many To Many (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 5 of 18... -
Page 6: Switch Login
IP address) Step 3: Default login credentials are, “Username: admin | Password: admin” Step 4: After clicking the Login button, the routing will be shown as below (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 6 of 18... -
Page 7: Port Tools
Web GUI. Here is an example that demonstrates how to change port 45 and port 46 from Outputs to Inputs. Follow Steps 1 – 2 below: (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 7 of 18... - Page 8 After clicking the “Edit” button, you will see the input/output setting, and will be able to add a description for the port. Click Apply and Port 45 and 46 will change from output to input. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 8 of 18...
-
Page 9: Port Routing
After these steps, the matrix will send P1 source to Output ports P14 and P15. You can use mode 1-4 to save and recall customized port routing configurations. Here is an example setting port routing data for mode 2. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 9 of 18... - Page 10 After you click ‘Save and Apply’, Mode2 routing configurations will be saved, and the routing data will be applied to the switch. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 10 of 18...
-
Page 11: System
7. System 7.1 User Management Add a user account via steps 1-7 shown below: (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 11 of 18... - Page 12 Edit a user account by following steps 8-12 shown below You can also delete a user account by pressing the “Delete” button as shown below: (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 12 of 18...
-
Page 13: System Config
After clicking “Apply”, the device will apple the new IP information. You will need to use these new settings to login to the web GUI 7.3 System Status (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 13 of 18... -
Page 14: Firmware Upgrade
After steps 1 and 2, a dialogue box will display, “Reboot the system. Do you want to Continue?”. Click ‘Ok”. Please note that if “Ok” is not selected promptly, you may be asked to login to the web GUI again. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 14 of 18... -
Page 15: Restore Factory Default Settings
“Reboot the device to take effect now. Do you want to continue?”. Click “Ok” to reboot the system. Factory Default Settings: IP Address: 192.168.168.254 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 Username: admin Password admin Management Ports: Port 47 and Port 48 8. Port Cable Test (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 15 of 18... - Page 16 After steps 1-4, you will receive the cable test result. A status example is shown below: (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 16 of 18...
-
Page 17: Maintenance
The items listed are not exclusive but are for illustration only). Parts and service, which are not covered by this limited warranty, are your responsibility. (844) 200-1945 | sales@zenty.com Copyright © Zenty AV Page 17 of 18... - Page 18 WWW.ZENTY.COM 9807 EMILY LANE STAFFORD, TX 77477 (844) 200-1945 SUPPORT@ZENTY.COM SALES@ZENTY.COM...
Need help?
Do you have a question about the ZT-106 and is the answer not in the manual?
Questions and answers