Download Print this page

SimTech UV8000B Operating Manual

Electrostatic air purifier

Advertisement

Quick Links

IMPORTANT INSTRUCTIONS
OPERATING MANUAL
ELECTROSTATIC AIR PURIFIER
with FILTER and UV LAMP
Model No.: UV8000B
READ AND SAVE
THESE IMPORTANT INSTRUCTIONS

Advertisement

loading
Need help?

Need help?

Do you have a question about the UV8000B and is the answer not in the manual?

Questions and answers

Summary of Contents for SimTech UV8000B

  • Page 1 IMPORTANT INSTRUCTIONS OPERATING MANUAL ELECTROSTATIC AIR PURIFIER with FILTER and UV LAMP Model No.: UV8000B READ AND SAVE THESE IMPORTANT INSTRUCTIONS...
  • Page 2 When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read all instructions before using the appliance. 2. To avoid fire or shock hazard, plug the appliance directly into a correct electrical outlet.
  • Page 3 15. DO NOT place anything on top of unit. 16. The collection rod has many edges and areas that can trap water. The collection rod should be completely dry before installing it into the unit. Figure 1 OZONE SAFETY INSTRUCTIONS The electrostatic air purifier will produce small amounts of ozone as a by-product.
  • Page 4 - 2 - OPERATING INSTRUCTIONS (See Figure 2) 1. Ensure the collector rod is firmly seated in place and the top cover is securely latched. 2. Turn the selector switch on the top of unit to LOW or HIGH mode. 3.
  • Page 5 - 3 - Figure 4 ● To clean the collector rod -- For common household particles 1. Remove the Collector Rod from unit as described above; 2. Use a soft, damp cloth to wipe the surface of the Collector Rod; 3.
  • Page 6 - 4 - ● To install the collector rod 1. Ensure the unit is unplugged and the collector is completely dry; 2. The collector rod can only be inserted by aligning the collector rod with the opening in the unit; 3.
  • Page 7: Cleaning And Maintenance

    - 5 - 2. Install the filter to the top cover by gripping and pressing the spring on the filter cover; 3. Ensure the filter is flush with the surrounding surface; 4. Flip the top cover forward and securely latch in place. CLEANING THE UV LAMP (See Figure 5) ●...
  • Page 8: Troubleshooting Tips

    - 6 - NOTE: Do not stick any foreign objects or your fingers inside the unit. 5. Use a clean, dry, soft cloth to wipe the external surface of unit. CAUTION: Do not use gasoline, benzine, thinner, harsh cleaners, etc., as they will damage the product.
  • Page 9 ©2018 brand here. All rights reserved. No part of this document, including descriptive content, concepts, ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, scanning or recording, or any information storage and retrieval system, without express permission or consent from the publisher.