CONTENTS Page(s) Safety Instructions and Electrical Safety 3 - 7 Blanket Feature Diagram Control Feature Diagram Using your Electric Throw Blanket 10-12 Cleaning and Care 13-15 Problem Solving Guarantee and Customer Services Connection to the Mains Supply Specification Disposal Information...
SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be observed, including the following: • Read all instructions. • Check that your mains voltage corresponds with the rating on the appliance. • To protect against electrical shock, do not immerse cord, plug, or appliance in water or any other liquids.
Page 4
SAFETY INSTRUCTIONS • Do not use outdoors. • This product is only intended for heating. • If overheating should occur, the built-in overheating safety device will shut the appliance off. • The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances.
Page 5
SAFETY INSTRUCTIONS • Warning: Children should not use this appliance. Close supervision is necessary when any appliances are used near children. • It is recommended that a qualified and registered person inspect your electric throw blanket after every 3 years of use. •...
Page 6
SAFETY INSTRUCTIONS • If any abnormality or defect in the operation of this blanket is observed, discontinue its use immediately and consult the manufacturer or a licensed electrician. • Regularly inspect the supply cord, plug, controller and throw blanket for any damage. If found damaged in any way, immediately cease use of the throw blanket and return to store or authorized service agent for inspection.
ELECTRICAL SAFETY THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET • Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 220 – 240V AC; 50Hz.
USING YOUR ELECTRIC BLANKET 1. Insert the mains plug into a suitable wall mains socket using an extension lead, if needed, to ensure that the lead is not stretched. 2. Push the power switch to “On” to turn on the throw blanket. The default settings will be displayed as “0”...
Page 11
USING YOUR ELECTRIC BLANKET Preheating • To preheat the throw blanket set the heat setting to “9”, and the timer setting to “1”. • After 1 hour, manually reduce the heat setting to avoid the appliance overheating. All night use •...
Page 12
USING YOUR ELECTRIC BLANKET Note: You may notice an odour when using the blanket for the first time, due to the insulation material. This is harmless and will subside quickly. Note: No attempt should be made to repair the throw blanket or have it repaired locally.
CLEANING AND CARE WARNING: Electrical Shock Hazard. Note: Before any cleaning, ensure the control is set to the “OFF” position and remove the plug from the wall socket. Note: Do not allow the controller to come in contact with any wet solution.
Page 14
CLEANING AND CARE Washing instructions Only use the below instructions: • Hand wash or spot clean • Do not machine wash above 40°c • Do not tumble dry • Do not wring • Do not bleach • Do not dry clean •...
Page 15
CLEANING AND CARE • Rinse the throw blanket thoroughly in clean fresh water. • Unfold the throw blanket and allow to dry naturally. Hand Washing • Immerse the throw blanket only (Do not allow the controller to come in contact with any wet solution), in a luke warm neutral detergent or mild soapy solution.
PROBLEM SOLVING My appliance does not work when I turn it on: 1. Check that your appliance is plugged in and the power is turned on at the mains socket. 2. Try another mains socket. 3. Check that the control has been set to the correct setting and is not in the off position.
GUARANTEE AND CUSTOMER SERVICES This product is guaranteed for 12 months from the date of the original purchase. If any defect arises due to faulty materials or workmanship, the faulty product must be returned to the place of purchase. Refund or replacement is at the discretion of the retailer. The following conditions apply: •...
CONNECTION TO THE MAINS SUPPLY This appliance is designed to operate from a mains supply of 220-240V~50Hz. Check that the voltage marked on the product corresponds with your supply voltage. How to change the fuse: 1. Slot the end of a screwdriver into the recess in the fuse holder of the plug.
SPECIFICATION Model number RHHT1003 (BLU) (OR) Rated voltage 220V - 240V ~ 50Hz Power consumption 120W Product dimensions (CMS) (W)130 x (L)180 Model number RHHT1004 (BLA) (BG) Rated voltage 220V - 240V ~ 50Hz Power consumption 120W Product dimensions (CMS) (W)130 x (L)180...
Swan Lane, Hindley Green, Wigan, WN2 4AY, United Kingdom / Product Care (Ireland) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, T23 AT2P, Ireland. Russell Hobbs is the registered trademark of Spectrum Brands (UK) Ltd.
Need help?
Do you have a question about the RHHT1003BLU and is the answer not in the manual?
Questions and answers