Networking & Communication
22Mbps Wireless Access Point / Bridge
Quick Installation Guide
The WAP-1965, a 22Mbps Wireless Access Point / Bridge, can work as
either 22M Access Point or Bridge. When works as Access Point, it allow
other 802.11b complaint 11M network card or PLANET's 22M PCI/PCMCIA
card to connect. When it is setup as bridge, it allow campus-wide wireless
connections between buildings with high speed 22Mbps. Fully compliant
with IEEE802.11b standard, it provides powerful features such as the
Windows-based configuration utility, Web Configuration, MAC filter, DHCP
Server and more.
Package Content
22Mbps Wireless Access Point
AC Power Adapter
User's Manual and Utility CD
This Quick Installation Guide
If any of the above items are missing or damaged, contact your
NOTE:
local dealer for support.
Hardware Installation
RESET
Connect the 22Mbps Wireless LAN Access Point to a Hub/Switch with
a RJ-45 Ethernet cable.
Connect the power adapter to the power socket on the Access Point,
and plug the other end of the power pack into an electrical outlet.
WAP-1965
POWER
ETHERNET
Need help?
Do you have a question about the WAP-1965 and is the answer not in the manual?
Questions and answers