Summary of Contents for JVD ENVOYE
- Page 1 Cordless Kettle ENVOYE Model : Original instructions Last update : 07/07/2022 3 RUE DES BRECHES – 44400 REZE - FRANCE Tél. +33 (0)2 40 75 98 20 www.jvd.fr...
-
Page 2: Important Safety Precautions
READ THESE INSTRUCTIONS CAREFULLY BEFORE THE INSTALLATION IMPORTANT SAFETY PRECAUTIONS - The installer must comply with the installation standards in the country at the time of installation. - Before use, ensure the rated voltage indicated on the appliance match the supply voltage. - If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid... - Page 3 - Do not operate or place the appliance on or near any hot surface (such as gas or electrical or electrical burner or in a heated oven). - Use the kettle only with the provided base unit. - Never disassemble your kettle and replace internal components to protect from any dangers.
- Page 4 - Caution, hot surface. Surfaces may become hot during use. - The outer surface of the kettle's stainless steel tank has residual heat after use - To avoid possible steam damage, turn the spout of the kettle backward to person when operating the appliance.
- Page 5 PRODUCT CONSTRUCTION 1 Hinged lid 2 Lid release button 3 On/off switch 4 Handle 5 Pilot light 6 Base unit HOW TO USE This device is intended for use in domestic and similar applications such as: - Kitchen corners reserved for staff in shops, offices and other professional environments;...
- Page 6 Filling Depress the Lid Release Button inward and open the lid up. Fill the kettle with tap water directly no over the MAX line. You are allowed to fill the kettle via the spout. Put the kettle containing clean water onto the Base Unit vertically. Plug the appliance in the mains socket.
- Page 7 This equipment complies with the regulations in European directives 2014/30/UE, 2014/35/UE, and 2011/65/EC. IMPORTE PAR JVD 3 RUE DES BRECHES – 44400 REZE - FRANCE Tél. +33 (0)2 40 75 98 20 www.jvd.fr...
Need help?
Do you have a question about the ENVOYE and is the answer not in the manual?
Questions and answers