IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this product. Keep the instructions at a suitable place close to the machine. Make sure to hand them over if the machine is given to a third party. DANGER –...
Page 3
avoid a hazard. • To avoid the risk of electric shock, do not disassemble the appliance. Take, or ship it to a quali昀椀ed service person for examination and repair. Incorrect reassembly or repair can cause a risk of 昀椀re, electric shock, or injury to persons when appliance is used.
The optimal uses are described in these instructions. This product is not intended for industrial or commercial use Additional assistance, by region, may be found online at www.singer.com You can 昀椀nd a digital version of this manual online at www.singer.com...
Overview Power Cord Dial Display Handle Farenheit Temperature / Celsius Timer Countdown Start Button Accessories list Hand-held hot stamping machine F1210\F0909\F0607 User manual Print As You Want Ultra thin hand-held hot stamping machine Main machine Insulated tray High temperature User manual resistant pressing...
Startup. Plug the machine into a wall outlet and short press the start button to start the machine. Machine will be in standy mode when plugged in until powered on. To turn on press the start button. Shutdown Press and hold the start button for 3s to shut down.
Timer settings: Turn the dial half a turn to the le昀琀. 2. Enter the timer setting mode a昀琀er a beep sound. 3. Turn the dial to the right again to increase the time (+). 4. Turn the dial to the le昀琀 again to decrease time (-).
Need help?
Do you have a question about the Momento Square Press and is the answer not in the manual?
Questions and answers