Ewind EW-AP201 Manual

802.11AC Wave2 1200M Dual-band Ceiling-mounted AP
EWIND
Product Introduction
EW-AP201 is a dual-band ceiling-mounted wireless access point that uses the 802.11a/b/g/n/ac wave2
wireless network standards. It operates in the 2.4GHz and 5GHz ISM wireless frequency bands, and
can support up to 128 concurrent wireless connections for high-speed internet access. With a Gigabit
Ethernet interface, it supports remote PoE (Power over Ethernet) power supply according to the
802.3af/at standards. In the 2.4GHz 802.11n mode, it can provide a maximum speed of 300Mbps,
while in the 5GHz 802.11ac mode, it can provide a maximum speed of 867Mbps, resulting in a total
wireless throughput of up to 1200Mbps. It features high power, high gain, high receive sensitivity, low
latency, and high density, enabling it to cover larger areas and provide superior wireless transmission
performance and stability. Its ceiling-mounted design, integrated Ethernet interface, and sleek
appearance make it easy to deploy, and it can be seamlessly integrated into the ceiling or wall without
disrupting the overall interior design layout. It is an ideal choice for wireless access in large-scale,
low-density, high-bandwidth environments such as hotels, supermarkets, offices, KTVs, and
restaurants.
EW-AP201
2.4G & 5.8G 1200Mbps 802.11AC Indoor
Wireless Ceiling AP
1: Chipset MT7621DAT + MT7603EN +
MT7613BEN, 256MB DDR2, 16MB Flash,
500mW High-Power, access 50users;
2: 1*FE（WAN)+1*FE（LAN) Ethernet port;
3: 48V PoE Support(not include PoE adapter);
4: Support hardware controller managed;
5: Support QVLAN+SSID, Portal,AC controller
Managed;
6: Support fat and thin integration;
EW-AP201
www.ewindnet.com
EWIND
1