TPM TPM300e Instruction Manual

Electric mini dumper

Advertisement

ELECTRIC MINI DUMPER
TPM300e
INSTRUCTION MANUAL
"0" Emissions, "0" noise, no pollution, long endurance
L
WA
" "

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TPM300e and is the answer not in the manual?

Questions and answers

Summary of Contents for TPM TPM300e

  • Page 1 ELECTRIC MINI DUMPER TPM300e INSTRUCTION MANUAL “0” Emissions, “0” noise, no pollution, long endurance “ ”...
  • Page 2 It can accommodate all kind of loads, on any terrain, applications in construction as well as in landscaping and agricultural work. Machine’s overall dimension and main parameter, please check table below. TPM300e Electric mini dumper Overall dimension (mm)
  • Page 3: Safety Tip

    Safety Tip 1.Not allowed loading with corrosive, toxic objects; Not allowed overloading(rated load 300kg); Not allowed carrying people. 2.During the course of operation, any emergency, please release the button B battery indicator 4.When the gradient of 18~20°, and running downgrade under rated load, only running backward is allowed to prevent overturning accidents.
  • Page 4: Operational Environment

    10.Don’t working under tire pressure below the rated pressure(drive wheel: 25~30 psi, barrow. It will protect the battery and charger. engaged wheel: 25~30 psi, transition wheel: 10~15 psi) and tire burst, otherwise it will b. In different countries, please match the correct voltage when charging. cause danger to people and affect service life of machine.
  • Page 5 Machine operating move reverse move forward Do not allow anyone lacking in age or experience to operate your power barrow. battery indicator 1.Check machine operator panel for details. 2.Be safety conscious & dress appropriately when operating your Power barrow. Always wear substantial footwear and a hard hat in relevant areas.
  • Page 6: Warranty

    Tyre pressure : maintain pressure in all wheels at 25~30psi When inspecting or maintaining, please pay attention to: Due to problem form inside of machine, need to open bottom of machine. 1. unload bucket 2. supporting machine body rotate handle to the ground 3.

Table of Contents