Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for schweisskraft PRO STICK 161
- Page 1 Operating Instructions Electrode Inverter PRO STICK 161 PRO STICK 161...
-
Page 2: Table Of Contents
Passing on as well as copying of this document, the use and distribution of its content are prohibited if not explic- itly permitted. Contraventions are liable to compensa- tion. Subject to technical modifications and error. PRO STICK 161 | Version 2.04 | EN... -
Page 3: Introduction
The safety notes are introduced by D-96103 Hallstadt signal words which express the concern of the risk. Repair service: Fax: 0049 (0) 951 96555-111 E-Mail: service@stuermer-maschinen.de Spare part orders: Fax: 0951 96555-119 E-Mail: ersatzteile@stuermer-maschinen.de PRO STICK 161 | Version 2.04 | EN... -
Page 4: Personal Protective Equipment
The staff member has to wear personal protec-tive equipment while performing different tasks on and with the machine which are indicated in the individual para- graphs of these instructions. The personal protective equipment is explained in the following paragraph: PRO STICK 161 | Version 2.04 | EN... -
Page 5: General Safety Instructions
- Never weld containers that contain ignitable or flam- mable materials. - Never mix gas in cylinders. - Replace gas lines that are damaged or show signs of damage. - Keep the pressure reducers in working order. PRO STICK 161 | Version 2.04 | EN... -
Page 6: Intended Use
Electrode Inverter due to incorrect operation or and may therefore only be used by qualified personnel, improper maintenance. in accordance with these operating instructions. Intended use also includes compliance with all the infor- mation in these instructions. PRO STICK 161 | Version 2.04 | EN... -
Page 7: Technical Data
5.2 Packaging All used packaging materials and packaging aids are re- cyclable and should be taken to a materials recycling de- pot to be disposed of. PRO STICK 161 | Version 2.04 | EN... -
Page 8: Description Of The Device
The icons on the control panel have the following meanings: Description of the welding sockets Connection for ground and electrode cables of Ø16 mm2 and 9mm plug. Maximum current 200A. Fig. 3: Description of the welding sockets PRO STICK 161 PRO STICK 161 | Version 2.04 | EN... -
Page 9: Mains Connection
- Never wind the welding cables around your body - Never work in the vicinity of the welding current source, never sit on or lean against it PRO STICK 161 | Version 2.04 | EN... -
Page 10: Operation
5 volts. This prevents the electrode from burning-out and the permanent short circuit can be easily released by lif- ting the electrode. PRO STICK 161 | Version 2.04 | EN... -
Page 11: Troubleshooting
2002/96 / EC on waste electrical and electronic equipment and transposition into national law, used stem for these appliances). electric tools must be collected separately and recy- cled in an environmentally sound manner. PRO STICK 161 | Version 2.04 | EN... -
Page 12: Spare Parts
Data on the machine type, item number and year of ma- nufacture is listed on the type plate attached to the de- vice. PRO STICK 161 | Version 2.04 | EN... -
Page 13: Ec Declaration Of Conformity
Responsible for documentation: Kilian Stürmer, Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt Hallstadt, 23.03.2023 ______________________ Kilian Stürmer General Manager PRO STICK 161 | Version 2.04 | EN... - Page 14 www.schweisskraft.de...
Need help?
Do you have a question about the PRO STICK 161 and is the answer not in the manual?
Questions and answers