Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for mivoc HM5
Summary of Contents for mivoc HM5
- Page 1 LOUDSPEAKER OPERATING MANUAL 中文...
- Page 3 WHEN SOUND BECOMES AN EXPERIENCE Mivoc lets us bring our passion for excellent sound to life within our own four walls. Here, the expertise ac- quired as a result of decades of experience and our specialist knowledge acquired through the development of professional loudspeaker systems come together to create a listening experience that is pure joy - and we want to share it with you.
-
Page 4: Table Of Contents
Graphic symbols Safety instructions PACKAGE CONTENTS Checking the packaging Unpacking and checking the contents MIVOC HM5 HM5 components HM5 connection terminal MIVOC HM5 INSTALLATION Front panel Preparing the speaker cables Connection to an amplifier Selecting the right amplifier MIVOC HM5 INSTALLATION... -
Page 5: Instructions And Information
To ensure optimum and safe operation, only use your mivoc speaker as described in this manual. Use for purposes other than those intended or other than those described in this manual may result in personal injury or damage to property. -
Page 6: Safety Instructions
Do not allow loudspeaker or other power and signal cables to form tripping hazards. Make sure that your mivoc product is positioned at least 50 cm away from heat sources (radiators, amplifiers, fireplace, candles, etc.). Insufficient distance from heat sources can cause malfunctions,... - Page 7 Ensure that your mivoc product is not exposed to direct sunlight. Direct sunlight can result in high heat absorption. This can lead to malfunctions, damage or fire. Do not place any containers holding liquids on or near your mivoc product.
-
Page 8: Package Contents
Do not exert any pressure on the external technical components (e.g. membrane, connection terminal, etc.). Check the contents of the packaging for completeness and damage. If you notice any damage, contact your mivoc dealer or the Support Centre immediately before using the product and clarify how to proceed. -
Page 9: Mivoc Hm5
MIVOC HM5 The mivoc HM5 is a compact passive 2-way hi-fi loudspeaker featuring a bass reflex design. It is equipped with a 5-inch woofer/midrange driver and a 1-inch tweeter. The HM5 is characterised by a frequency range of 42 Hz to 21 kHz and an efficiency of 84 dB. A suitable external amplifier (compact hi-fi amplifier, AV receiver or multi-channel (stereo) audio amplifier) is required for operation. -
Page 10: Hm5 Connection Terminal
HM5 CONNECTION TERMINAL Figure 2. HM5 - Connection terminal. Connection terminal with information on load capacity and impedance Speaker connection terminal - negative pole Speaker connection terminal - positive pole The speaker terminals can accommodate cables with a cross-section of up to 2.5... -
Page 11: Mivoc Hm5 Installation
MIVOC HM5 INSTALLATION FRONT PANEL The front panel of the HM5 can be removed and replaced without tools. Fastening is realised using magnets that are integrated into the housing and cover. To remove the front panel, proceed as follows: Figure 3. HM5 - Removing the front panel. - Page 12 To attach the front panel, you can proceed as described below: Figure 4. HM5 - Attaching the front panel. Ensure that the speaker is standing on a firm and stable surface. Firmly hold the front panel on the left and right-hand sides. Guide the panel evenly and slowly to the front of the speaker. Make sure that the corners of the panel line up with the corners of the front of the speaker.
-
Page 13: Preparing The Speaker Cables
PREPARING THE SPEAKER CABLES Before you connect your speakers to your amplifier, you need to prepare the speaker cables. Figure 5a. Stripping the cable. Figure 5b. Twisting the cable ends. Remove a piece of the cable insulation at each end Twist the strands of the cables as such that no indi- of each speaker cable to suit the depth of the am- vidual strands protrude and a uniform, sturdy cable... -
Page 14: Connection To An Amplifier
Connect your HM5 speakers to your amplifier using a suitable speaker cable. Connect the minus (-) connection of the HM5 to the minus (-) connection of an amplifier output (Figure 6 shows the right-hand output as an example). Connect the plus (+) connection of the HM5 to the plus (+) connection of the same amplifier output. - Page 15 Now connect the other prepared end of the wire of the speaker cable to the Minus (-) connection of an amplifier output. Follow the amplifier instructions for details on how to connect the speaker cable. Then press the speaker terminal labelled Plus (+) on the connection terminal of the HM5 speaker downwards until the two holes overlap.
-
Page 16: Selecting The Right Amplifier
SELECTING THE RIGHT AMPLIFIER Make sure that you operate your HM5 speakers with a suitable amplifier. The amplifier you are using must be designed for connecting loudspeakers with an impedance of 4 ohms. Your amplifier should also be capable of providing a continuous output of at least 50 W. -
Page 17: Mivoc Hm5 Installation
MIVOC HM5 INSTALLATION The following section provides instructions on how to set up your HM5 speakers for an optimal listening experience. DISTANCE TO LISTENING POSITION Listening position Figure 10. HM5 - Setup - Stereo triangle. Depending on the room size and installation location, you should place the speakers at a distance ranging between 1.5 m and 4 m from each other. -
Page 18: Installation Height
1.3 m - 3.5 m Listening position Figure 11. HM5 - Installation height. For the best possible listening experience with balanced and accurate localisation, the tweeters of the speakers should be positioned approximately at the listener's ear level. If you cannot install the speakers at the ideal height, you can also tilt the speakers slightly. -
Page 19: Distance To Interfaces
Figure 12. HM5 - Distance to interfaces. When positioning your HM5 speakers, make sure that the distance between the rear of the speakers and adjacent walls is not less than 10 cm. This will ensure that your HM5 works properly. -
Page 20: Technical Data
TECHNICAL DATA HM5 SPECIFICATIONS ELECTRO-ACOUSTIC DATA Frequency range (-3 dB) 50 Hz - 19 kHz Frequency range (-10 dB) 42 Hz - 21 kHz Nominal impedance: 4 Ohm Efficiency 84 dB Rated load capacity 50 W Programme load capacity 100 W... -
Page 21: Hm5 Dimensions
HM5 DIMENSIONS ≈215 ≈184 Figure 13. HM5 - technical drawings. 中文... -
Page 22: Manufacturer Information
LIMITATION OF LIABILITY mivoc grants a 2-year warranty on mivoc products. The warranty period mivoc shall not be liable for personal injury or damage to property, or for claims begins on the date of purchase. The warranty applies to material or pro- arising from unsuitable, dangerous or improper use of the products. - Page 23 中文...
- Page 24 HEAD OFFICE Neuenhofer Strasse 42-44 42657 Solingen, Germany +49 212 382 26-0 info@mivoc.com www.mivoc.com , All rights reserved. The technical data and functional product features are subject to change. Designed in Germany Photocopying, translating or any other form of reproduction of sections or of the entirety of the user manual is prohibited.
Need help?
Do you have a question about the HM5 and is the answer not in the manual?
Questions and answers