Download Print this page

ASM CBCG-1 Instructions

Spa- side mount cover glider- caster style

Advertisement

Quick Links

PARTS LIST
DESCRIPTION
A. Glider Arms with Casters
B. #10 x 1" Mounting Screws
Tools Needed: Power/Cordless Drill
with Phillips bit and tape measure.
IMPORTANT "DO NOT's
Do Not Sit on open cover
Do Not Mount Glides on the front side near equipment area
Do Not Twist or move Gliders sideways.
Do Not Allow NO MORE than 75 pound of weight to arms (exp Waterlogged cover's, snow loads,ect)
Avoid lift "DAMAGES"
Limited Lifetime Warranty
ASM Manufacturing LLC warrants this product to be free from defects in workmanship and material, under normal use and service
conditions, for a Limited Lifetime Warranty. This warranty extends only to the original purchaser. What we will do to help with
warranty replacement. We will repair or replace the product subject to receiving acceptable photos and or the defective parts shipped
to us freight prepaid. Our warranty does not include the return shipping cost of the replacement parts and or a new cover lift.
This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse,
improper or abnormal usage or Specifically waterlogged spa covers or for commercial, rental purposes and or used as store display
models.
No other warranty beyond that specifically set forth above is authorized and we are not responsible or liable for indirect, special or
consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any
economic loss, loss of property, loss or revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature.
Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may
not apply to you. The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties for a particular
purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Spa- Side Mount Cover
Glider- Caster Style Instruction
QTY
2
12
":
ASM Manufacturing LLC / Cover Butler
CBCG-1
A
B
4956 W 6200 S, #312
Kearns, UT 84118
Swim Spa
Gliders
(6 Arms)
Revision 2/27/2024

Advertisement

loading
Need help?

Need help?

Do you have a question about the CBCG-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for ASM CBCG-1

  • Page 1 Limited Lifetime Warranty ASM Manufacturing LLC warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a Limited Lifetime Warranty. This warranty extends only to the original purchaser. What we will do to help with warranty replacement.
  • Page 2 INSTALLATION Position the FIRST Glider Arm between the spa cabinet side edge and the MID-LINE point of the spa. Illustration #1 Confirming the Glides UPPER SURFACE position is flush with the of the spa top. The arm should be LEVEL (up/down.) Illustration #2 MARK the Screw positions of the arm.