imarflex IHS-9204BC Instruction Manual

SELF-CLEAN Feature:
1. After hair drying or styling, turn off the unit then long press the
HEAT BUTTON for approximately 5 to 7 seconds to start the
self-clean feature. The green light will be flashing indicating
that the unit is in self-clean mode.
2. The unit will automatically stop after the self-clean cycle.
CLEANING AND MAINTENANCE:
- Make sure to clean the air inlets and outlets to prevent
blockages that may cause overheating.
- The hair styler must be cleaned at least once a month
1. Make sure to turn off the unit and unplug the hair styler from
the convenience outlet.
2. Clen the air outlet.
3. To clean the air inlet, remove the filter cover then remove the
hair and dust in the filter.
4. Re-attach the filter and ensure that the groove of the
connector and the projection of the filter are in line.
REMINDER: Please do not forget to register your
product warranty through the warranty registration
website at https://imarflex.ph
Distributed by:
Xelframe Enterprises Inc.
Unit 711 IPI Buendia Tower Condo 501, Gil Puyat Ave.,
Pasay
Made in China