Do you have a question about the 1217-TR and is the answer not in the manual?
Questions and answers
Andrea preston
April 2, 2025
Mit goes off after 20 minutes we have only used it 3 times
Andrea preston
April 2, 2025
We charged the light fully but goes off after 20 minutes and gets really hot
5 comments:
Mr. Anderson
April 2, 2025
The Workzone 1217-TR light may turn off after 20 minutes and get hot due to overheating or overuse. The manual states never to place the product on or near hot surfaces or expose it to high temperatures, and to use it on a heat-resistant, level, and dry surface. If the product is used in a hot environment or placed improperly, it may overheat and shut off as a safety measure.
This answer is automatically generated
Hi we have used it 3 times and no it's not exposed to head we just turn it on a place it down on the work surface which is marble
April 3, 2025
@Mr. Anderson
Andrea
April 3, 2025
@Hi we have used it 3 times and no it's not exposed to heat we just turn it on and place it down on the work surface which is marble
Andrea
April 4, 2025
@Hi we have used it 3 times and no it's not exposed to head we just turn it on a place it down on the work surface which is marble
Page 3
Package contents/control elements Package contents/control elements USB port ON/OFF switch Charging indicator Base/eyelet USB power cable Auxiliary light...
Page 4
Table of content Table of content Overview........................2 Package contents/control elements...............3 General information....................5 Reading and storing the user manual................5 Proper use....................... 5 Explanation of symbols................... 5 Safety........................6 Safety notes........................6 Safety notes for batteries....................8 Before first use......................9 Check the product and scope of delivery...............9 Charging the product......................9 Operation.........................9 Switching the light on/off and changing settings............9...
Page 5
General information General information Reading and storing the user manual This user manual forms part of this rechargeable LED worklight, hereinafter also referred to as product. It contains important information on how to set up and use the device. Read the user manual carefully, in particular the safety instructions, before using the product.
Page 6
Explanation of symbols The product is protected against penetrating foreign objects with a diameter of ≥ 1 mm and it is splashproof. This product is in risk group 2. Improper use of the product may cause eye damage. Do not stare into the active light source! Safety The following signal words are used in this user manual.
Page 7
Safety people with reduced physical and mental abilities) or lack of experience and knowledge (e.g. older children). - This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.
Page 8
Safety - Never place the product on or near hot surfaces (stove tops, etc.) and never expose the product to high temperatures (heaters, etc.) or to bad weather (rain, etc.). - Never immerse the product in water to clean it, and do not use a steam cleaner.
Page 9
4. Pull the USB power cable out of the product's USB port and the mains adapter. Operation Switching the light on/off and changing settings Model 1217-TR Press the ON/OFF switch to switch the LED on, off and change the settings.
Page 10
Alternatively use the integrated magnet to attach the product to magnetic surfaces. Folding out the LED (model 1217-TR) Fold out the LED to adapt the light output to your demands.
Page 11
Operation Folding out the base (model 1217-RE) Adapt the base in a range of ≤ 12cm to guarantee the product remains stable on an even surface. ≤ 12 CM Cleaning NOTE! Risk of damage! Improper handling can damage the product. - Do not use any harsh cleaning products, brushes with metal or nylon bristles, or sharp or metallic cleaning materials such as knives, hard scrapers or similar.
Page 12
Storage Storage NOTE! Risk of damage! Improper storage of the product can result in damage. - Store the product in a clean, dry, frost-protected place out of the reach of children. All parts must be completely dry before they are put away. - Always store the product in a dry place.
Page 13
Technical data Technical data Model number: 1217-TR Battery type: 3.7 V ; Li-ion, 3,600 mAh Supply voltage: Input (USB): 5 V / 1 A Protection class: Charging time: approx. 5 hours LED type: 5 W COB (x2) LED colour: 6500 K (± 500 K) Brightness: 523 lm (±...
Page 14
Disposal Disposal Disposing of packaging Dispose of packaging according to type. Sort the paperboard and cardboard as waste paper and the film as recyclable material. Old electrical products may not be disposed of as household waste! If the product cannot be used anymore, each consumer is obligated by law to dispose of old products separately from household waste, e.g.
Page 15
PRODUCED IN CHINA FOR: ALDI STORES LTD. PO BOX 26, ATHERSTONE WARWICKSHIRE, CV9 2SH ALDI STORES (IRELAND) LTD. PO BOX 726, NAAS, CO. KILDARE Visit us at www.aldi.com AFTER SALES SUPPORT 842492/601436 01909 517672 aldi@0800repair.com YEAR MODEL: WARRANTY 1217-TR, 1217-RE 01/2025...
Need help?
Do you have a question about the 1217-TR and is the answer not in the manual?
Questions and answers
Mit goes off after 20 minutes we have only used it 3 times
We charged the light fully but goes off after 20 minutes and gets really hot
The Workzone 1217-TR light may turn off after 20 minutes and get hot due to overheating or overuse. The manual states never to place the product on or near hot surfaces or expose it to high temperatures, and to use it on a heat-resistant, level, and dry surface. If the product is used in a hot environment or placed improperly, it may overheat and shut off as a safety measure.
This answer is automatically generated
@Mr. Anderson
@Hi we have used it 3 times and no it's not exposed to heat we just turn it on and place it down on the work surface which is marble
@Hi we have used it 3 times and no it's not exposed to head we just turn it on a place it down on the work surface which is marble
andrea.preston01@btinternet.com