Subscribe to Our Youtube Channel
Summary of Contents for Uncaged Ergonomics RISE UP GLASS
- Page 1 Electric Height-Adjustable Desk Assembly & Operating Instructions 240-583-0517 hello@UncagedErgonomincs.com...
- Page 2 Uncaged Ergonomics and its agents from any liability for such loss or injury. In no event shall Uncaged Ergonomics or its agents be liable for any direct, indirect, punitive, incidental, damages or injury whatsoever arising out of or connected with the use or misuse of its products.
- Page 3 PARTS: Desktop Legs Feet (2 pcs) Alan Screws (M8x14) (16 pcs) Power Adapter AC Outlets Phillips Screws 4mm Alan (M4x10) (4 pcs) Wrench Power Cable Phillips-Head M6x8 screw *8 Screwdriver...
- Page 4 ASSEMBLY STEP 1: Lay the desktop upside down. Attach the AC Outlets to the Desktop with 4 phillips-head screws. Motor Control Box STEP 2: Connect The Legs To The Desktop Align the legs with the center beam of the desktop. Use 4 alan screws to secure the right leg. Repeat for the left leg. IMPORTANT: the motor should be on the same side as the control box.
- Page 5 ASSEMBLY STEP 3: Connect The Feet Use 4 alan screws to connect the right foot to the right leg. Repeat for the left side. IMPORTANT: the long side of the feet should face the front edge of the desk. STEP 3A: Connect The Wires Connect the control box to the keypad.
- Page 6 Operating Instructions Up and Down Memory Button Tip! Save Height#1 as your comfortable sitting height and Height#2 as your comfortable standing height. Raise/Lower Desk: Press and hold the up arrow to raise the desk. Press and hold the down arrow to lower the desk. Memory Settings: Press and hold "M"...
- Page 7 Operating Instructions Set The Highest Height Limit Simultaneously press the "UP" and "DOWN" button for 3 seconds. Release the "DOWN" button and keep pressing the "UP" button for 0.5 seconds. Press the "DOWN" button 3 times. When the display flashes once, the highest limit setting is successful.
- Page 8 Operating Instructions Lock The Desk Press "M" until the display shows "s-". Keep pressing "M" for 5 seconds until the display shows the number. Continue holding "M" for another 3 seconds until the display shows "LOC". Unlock The Desk When the display shows "LOC", press and hold "M" for 8 sec until the display shows the numerical height.
- Page 9 Operating Instructions Anti-collision sensitivity setting Press and hold 1 button and 2 button at the same time for 5s within 3s, and then press the up or down button to change the anti-collision sensitivity. After adjustment, press and hold 1 button and 2 button at the same time and keep it within 3s to complete the setting or complete the setting after no operation for 5s.
Need help?
Do you have a question about the RISE UP GLASS and is the answer not in the manual?
Questions and answers