48s
STEREO TURNTABLE
STEREO-PLATTENSPIELER
PLATINE TOURNE-DISQUE STEREO
GIRADISCHI STEREO
§ Operating Instructions
Bedienungsanleitung
Mode d'emploi
Istruzioni per l'uso
Thank you for buying this Pioneer product.
Please
read through
these operating
instructions
so you
will know how to operate your model properly. After you
have finished
reading the instructions, put them away in
a safe place for future reference.
In some countries of regions, the shape of the power plug
and power outlet may sometimes differ from that shown
in the
explanatory
drawings.
However,
the method
of
connecting and operating the unit is the same.
LINE VOLTAGE SELECTOR SWITCH
Only
multi-voltage
models
are
provided
with
this
switch. U.S., Canadian, European, U.K., and Australian
models are not provided with this switch.
The fine voltage selector switch is located on the
top ofthe
cabinet of this turntable. Before your turntable is shipped fom
the factory, the switch is set to the power requirements ofthe
WARNING:
to prevent FiRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
(For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed war-
ranty card and keep in a secure area. This is for your security.
turntable's destination.
Check that it is set properly belore
plugging the power cord into the outlet. If the voltage isnot
-'properly set or if you move to an area where the voltage re-
quirements differ, adjust the selector switch as follows:
@
Use a medium-sized
screwdriver.
Insert the tip of the
screwdriver into the groove of the selector switch and
turn it so that the power voltage marking of your irea
points to the arrow.
Q PIONEER'
"This product is manufactured to comply with the radio in-
=
terference requirements of EEC Directive 76/889/EEC and
rab)
eT
82/499/EEC."
(
<a
Need help?
Do you have a question about the PL-570 and is the answer not in the manual?
Questions and answers