Download Print this page

Advertisement

Quick Links

PE-10 AMPLIFIER
Owner's Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
If the product you purchase uses battery, you should pay attention when
idle or store it for a long time: to charge the battery when the battery is at
low-power status.If the battery keeps low-power status for a long time, its service
life will be reduced. The battery should be full-charged if you want to store the
product when you don't use it.
WARNING: These instructions are used to remind users that improper
use of this product may cause personal danger to you.
CAUTION: These instructions are used to warn users that improper use
of this product may result in damage to the equipment.
WARNING
Before using the power supply, connect the power supply port of the device to
the power socket with ground protection.
Do not disassemble or modify the built-in components of the device and adapter.
Use the power adapter or power cable delivered with the device. The power
cable or adapter does not apply to other devices.
Before use, check whether the rated voltage of the equipment is consistent
with the mains voltage. Inconsistent voltages may cause equipment damage
or even personal injury.
Do not overtwist or bend the power cable, and do not place heavy objects on it.
Otherwise, the power cable may be damaged, resulting in short circuit. Broken
wires can cause fire and a risk of electric shock!
Do not share the same socket with too many appliances. When using an
extension cable, take special care that the total power of all the devices you
connect to the extension cable should not exceed the power that the extension
cable can withstand. Overloading the power supply can cause the wires to heat
up and melt the insulation covers of the wires.
1
When inserting or removing the plug of the power cable from the socket, hold
the plug of the power cable.
Avoid entangling the power cable with various conductors. Also, keep children
away from power cords and wires.
When hands are wet, do not take the power cord of the device or insert or
remove the plug of the power cord from the socket.
Before moving the device, unplug the power cable and all external device
cables connected to the device.
Before cleaning the device, turn off the power and unplug the power cord
from the socket.
If thunderstorms occur, remove the power plug from the socket.
CAUTION
Do not place the device in the following places:
1. Places where the temperature is too high (e.g. in a closed vehicle in direct
sunlight, near a hot pipe or above a hot machine).
2. Damp places (e.g. bathroom, toilet, supermarket floor, etc.).
3. Places with heavy humidity.
4. Places that are directly exposed to rain.
5. A dusty place.
6. Where there are strong tremors.
When the following situations occur, please immediately turn off the power
and unplug:
1. The adapter, power cable, or plug is damaged
2. The device emits smoke or generates odor
3. The device is directly exposed to rain (or wet)
4. The device operates abnormally or behaves abnormally
Power Supply:
Do not share a power outlet with other inverter-controlled devices (such as
refrigerators, washing machines, microwave ovens, or air conditioners) or
electrical devices with motors. Due to the different use methods of electrical
equipment, the generated power noise may cause the equipment to fail or
produce noise. If a separate power outlet is not available, install a power
noise filter between the device and the power outlet.
2
Top Panel
01
02
03
04
05
08
09
10
11
INPUT: 1/4" Audio frequency musical signal input.
01
Display: Display working situation: tuner or play.
02
Tuner/PL: Toggle the gear switch twice arbitrarily, the tuner mode and play
03
mode could be switched freely.
Earphone Socket: 1/8" earphone output socket.
04
Bluetooth Indicator: Light keep on when connected, flash when unconnected.
05
Charge Indicator: Light keep on when fully charged, flash when undercharge.
06
POWER: Power Switch.
07
MOD:
08
Chorus: get a soft sound just like the water.
Flanger: get a wandering tone.
Phaser: get a strong sense of flow for the performance.
Tremolo: just like tuning the volume knob in a regular way on the guitar.
DLY/REV:
09
Delay: One of the most commonly used effects, playing together with
Distortion and Overdrive.
Echo: Feels like walking between reality and ecstasy, following like a
shadow.
Room: Soft room reverb tone.
3
06
07
12
13

Advertisement

loading
Need help?

Need help?

Do you have a question about the PE-10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rowin PE-10

  • Page 1 PE-10 AMPLIFIER Top Panel When inserting or removing the plug of the power cable from the socket, hold the plug of the power cable. Avoid entangling the power cable with various conductors. Also, keep children Owner's Manual away from power cords and wires.
  • Page 2 Specifications FCC Warning Statement Hall: Make a more exaggerated and solemn large space reverb tone. Changes or modifications not expressly approved by the party responsible for ORIVE: Input: 1/4" mono instrument, bluetooth playback. compliance could void the user’s authority to operate the equipment. This Clean: Acoustic effect of electric guitar, which can use together with Output: 1/8"...