Section 5.4 | Windows Xp - SMC Networks 2536W-AG User Manual

Step 4: You will then be prompted to enter the location of the drivers. This should be ?:\driver.
(Note: The ? equals the letter of your CD-ROM drive. In most cases, this is D.) Then click [OK].
You can also click [Browse] and browse to the location of the drivers on the CD for further
verification.
Step 5: The system should find the drivers. Click the [Next >] button to continue the installation.
(Note: If the system could not find the drivers, click the [< Back] button, and select the [Display
a list of the known drivers...] option. Select [Network Adapters] from the list of devices, press
[Have Disk] and once again browse to the location of the drivers.
Step 6: You have now completed the driver installation. Click [Finish] to initialize the adapter.

Section 5.4 | Windows XP

Step 1: After you have inserted the EliteConnect Universal SMC2536W-AG High Power Wireless
Cardbus Adapter in your machine and turned it back on, the Operating System will automatically
recognize the adapter and prompt you for the appropriate drivers. Select [Install from a list or
specific location] and click the [Next >] button to begin the installation.