ALLSOP Drifter Lantern Instructions

Specs:
10-12 hr run time on full brightness
2-3 hr AC charging
Use a slightly damp cloth to spot
clean (if needed). Wipe dry with a
clean dry cloth.
Rated IP65 - Rain and splash resistant
Underside of Lantern
1. Charge Up Lantern using Provided Cord
a. Lift up rubber seal to access plugin hole.
b. Insert the round connector (DC) of the cord into plugin hole.
c. Insert the USB end into the provided wall charger
and plug charger into wall outlet (CORD AND WALL
CHARGER FOR INDOOR USE ONLY).
d. A small red light will turn on when charging and will
shut o when lantern is fully charged.
e. If the battery was fully drained, it may take a few
minutes of charging for the light to achieve full brightness.
3. Enjoy!
Drifter Lantern
Congratulations on the purchase of your Drifter Lantern.
Setting up your Lantern is simple, follow the steps below:
USB Wall Charger
Cord Channel
5.5 feet
Instructions
TM
Parts Included in Package:
5.5 ft. Indoor Power Cord
with 120V USB Wall Adapter
Instructions:
USB
2. Turn on using Button Underneath Lantern
a. Press 1x to turn on to full brightness.
b. Press 2x for medium brightness.
c. Press 3x for low brightness.
d. Press 4x to turn o .
We want you to be completely satisfied. If you have any
questions please contact our customer service department.
SUPPORT@ALLSOPGARDEN.COM | 800-426-4303
TM
Glass Lantern with LED Base
Unit and Wood Handle
Underside of Lantern
THANK YOU FOR YOUR PURCHASE!
Love your product? Please leave us a review!