Step 3: Install Software; Step 4: Run Jukebox Tutorial; Step 5: Verify Nomad Jukebox Driver Installation - Creative NOMAD JUKEBOX Getting Started Manual

NJb.book Page 3 Friday, August 11, 2000 10:08 AM

Step 3: Install Software

1. At the Creative PlayCenter 2 setup screen,
the applications to be installed are selected
by default. Click the OK button to start the
installation.
The Creative On-line Registration
dialog box appears.
2. Click the Next button to register so
Creative can keep you updated on the
latest developments for NOMAD
Jukebox.
3. Follow the instructions on the screen to
continue with the installation.
4. When prompted to restart your system,
leave the CD in the CD-ROM drive, select
the Yes, I want to restart my computer
now option and then click the Finish
button.
Step 4: Run Jukebox
Tutorial
1. After restarting your computer, you will
be prompted to run the NOMAD Jukebox
Tutorial.
2. Click the Yes button to run it.
Figure 2-3: NOMAD Jukebox Tutorial.
Step 5: Verify
NOMAD Jukebox
Driver Installation
1. Click Start -> Settings -> Control Panel.
2. In the Control Panel window,
double-click the System icon.
3. In the System Properties dialog box,
click the Device Manager tab.
4. In the Device Manager tabbed page,
double-click Universal Serial Bus
controllers, and then check that Creative
NOMAD Jukebox is present as shown in
Figure 2-4 below.
Figure 2-4: Verifying that Creative NOMAD
Jukebox driver is installed correctly.
Setting Up Your NOMAD Jukebox 2-3