SonicAlert Home Aware HA360M-II WRB Quick Reference Manual

1
Se�ng Up Your HomeAware™ Main Unit
1. Remove all contents of the box.
- HA360M-II - Main Unit
- HA360SA2.1 - Security Alert
- HA360V-II - Bed Shaker
- Midland NOAA Weather Radio
2. Slide open the ba�ery compartment on the bo�om of the HA360M-II by pushing le� on the arrow and li�ing on
the opposite end and the same �me.
3. Take the ba�ery out and plug the connec�on wire into the top right corner of the ba�ery compartment. Replace
the ba�ery and slide the ba�ery door back into posi�on.
HA360M-II Power Supply
1. Plug in the power supply in the "5.1V 2A DC IN" port on the back of the unit. There is a cover over the "5.1V 2A DC
IN" port, push the cover down un�l it snaps off and plug in the power supply. Once the power supply is inserted
snap cover back into place pushing up. Plug the other end of the power supply in a 120V outlet.
Message that may scroll across the display before setup is completed
1. MISSING VIBRAT will scroll across the display un�l the vibrator is plugged in if you are using the addi�onal acces-
sory op�on (HA360V-II) vibrator. If you are not using the vibrator, your selec�on should be set to OFF so that the
alert does not trigger needlessly. It comes from the factory set to ON.
2. Press ALARM OFF bu�on to clear scrolling message.
3. Press SET UP bu�on and the word LINK will be shown on the display.
4. Press the TONE bu�on un�l the word V SENS is shown on the display, press ENTER.
5. Press the TONE bu�on to toggle between ON and OFF, press ENTER on your selec�on.
For additional information refer to your HA360M-II user and quick start guide both located on sonicalert.com.
Go to https://www.youtube.com@sonicalert530/shorts for instructional videos.
2
1.
2.
3.
For additional information refer to your HA360SA2.1 and Midland Weather Radio User Guides.
3
1.
2.
For additional information refer to your HA360SA2.1 and
Midland Weather Radio User Guides.
HA360M-II
Midland
2.1 Midland
2.1