Sealey BGST1 Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT
IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
Only use on firm, level, unobstructed surfaces which are capable of supporting the bench grinder floor stand and bench grinder.
9
Ensure bench grinder floor stand is fixed to surface capable of supporting stand, bench grinder and work piece.
9
Always use bench grinder floor stand in a well lit clean and dry place.
9
Make sure surface is firm under foot. preferably concrete.
9
Enlist help to place and remove the bench grinder from its working position.
9
Replace or repair damaged parts. Use only recommended parts. Unauthorised parts may be dangerous and will invalidate the warranty.
9
Keep bench grinder floor stand dry.
9
Keep children and unauthorised persons away from the work area.
9
Ensure that the unit is properly and securely assembled before use.
9
WARNING! Failure to comply with these instructions may result in damage to the stand or other property and/or personal injury.
‰
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and
‰
situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but
must be applied by the operator.
2. INTRODUCTION
Sturdy bench grinder stand with floor mounting holes for added security. Heavy-duty cast iron base. Adjustable heights from 700mm
to 900mm. Features accessory tray and two compartments for the storage of grinding wheels. Power cable hook for safe storage of
grinder power cords. Compatible with the Sealey range of bench grinders, and also suitable for other leading brands of bench grinders.
3. SPECIFICATION
Model No:
Nett Weight:
Size (W x D x H):
4. ASSEMBLY
Numbers refer to attached parts list.
FIG.1
© Jack Sealey Limited
ADJUSTABLE BENCH GRINDER FLOOR
STAND
MODEL NO:
BGST1
7.62kg
315 x 250 x 900mm
Original Language Version
BGST1
BGST1 Issue 1 06/08/24