Advertisement
Advertisement
Table of Contents
Summary of Contents for Deity DQC2
- Page 1 DQC2 Product Manual...
- Page 2 Thank you for using this product. In order to better use this product in a more safely way, please read the user manual carefully. Thank you for purchasing DEITY. We provide you with the DQC2 charger, which is specially designed for charging smart batteries. It has a unique dual-slot design that can provide charging functions for two smart batteries at the same time, effectively saving your time.
- Page 3 Important 底框高度28 pt ● Please read this User Guide carefully and keep it properly. ● When giving the product to others, be sure to attach this user guide. ● Please pay attention to all warnings and follow all instructions in the user guide. Warning: Do not place this product in a place with corrosive chemicals to prevent it from being corroded.
-
Page 4: Fcc Statement Of Compliance
(2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Any changes or modifications not expressly approved by DEITY may void the user's authori- ty to operate the equipment. Note: This equipment has been tested and determined to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 5 Instructions for Use Rechargeable battery holder USB-A output port Battery indicator Charging indicator switch Battery indicator Splicing energized contacts Spliced track chute Splicing unlock button Splicing energized contacts USB-C power input port USB-C power input port...
-
Page 6: How To Use
Use the original data cable and adapter, or the standard USB-C interface cable. Plug the USB-C port of the data cable into the USB-C power input port on the rear of the DQC2 charging stand, making sure it is connected firmly. The two USB-C input ports on the back of the DQC2 charging stand can be connected to power input, supporting up to 100W power input. - Page 7 In the splicing state, a full power 100W power input can only work for one DQC2 charger at a time. The spliced char- gers are queued up in order. When the previous DQC2 charger has fully charged the battery, it can be intelligently switched to the rear splicing charger.
-
Page 8: Function Of Buttons
● Battery connection status: The power indicator at the corresponding position of the battery slot displays the battery power. ● Waiting for charging (splicing state): Displays the current battery power while waiting for the status light. ● Press the button five times, the LED will flash green three times, and DQC2 enters half-charge mode. -
Page 9: Introduction To Parameters
● Product size：124×95×39 mm ● Working temperature：0~55℃ The above data are all measured by DEITY Audio Laboratory and are subject to actual data! Tip: The illustrations in this manual are for reference only. Due to the continuous development of new prod- uct versions, if there is any discrepancy between this product and the user manual illustrations, please refer to the product itself. - Page 10 Protect you from all kinds of dangers Overdischarge Overcharging Overcurrent Activation Protection Protection Overpower Short Circuit Overvoltage Protection Protection Rotection Restoration Over Temperature Electromagnetic Protection Protection Field Protection...
- Page 11 Users promise to be responsible for their own actions and all consequences arising therefrom. DEITY is not responsible for any losses caused by the user not using the product in accordance with the User Manual.
Need help?
Do you have a question about the DQC2 and is the answer not in the manual?
Questions and answers